Wiltshire · England

Bath Resealing in Semington

Bath, shower and sink resealing with new mould-resistant silicone in Semington, carried out at your home and guaranteed for a year.

  • A messy previous reseal
  • Unsealed corners
  • Mould you cannot clean out
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Semington homes

Bath resealing in Semington, done in place

We reseal baths, shower trays, basins and worktops, with mould-resistant sanitary silicone. Most jobs take a couple of hours, plus curing time. Whether it’s silicone smeared on tiles and water getting behind the bath or tray, we can help, on kitchen worktops & sinks, basins & vanity units and baths alike.

Whatever the size of the job, you get the same one-year guarantee.

Roll-top bath being refinished by a Surface Doctor technician
Where
Semington (BA14)
Region
Wiltshire
Warranty
One year on every repair
Quotes
Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026

Common problems we fix in Semington

Joints split if the bath or tray moves, frequently because it was sealed while the bath was empty.

These are the problems we are asked about most:

  • Water getting behind the bath or tray
  • Missing sealant behind the taps
  • Gaps in the seal
  • Discoloured, yellow sealant

Before you book anyone

  • Whether they match the colour on site
  • How the room is protected while they work
  • What preparation is included
  • Aftercare advice

Choosing a repair company

Your questions about bath resealing in Semington

What information do you need?

Photos of the damage, a photo of the entire bath or shower and your postcode. After that, we just agree a date.

Will there be a smell?

It depends on the job, but often a little. Open windows and an extractor fan help.

How do I get a price for bath resealing in Semington?

Because every job differs, we price from pictures. You know the full cost before anything is booked.

Why does mould come back so fast?

Normally poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.

How long does a reseal take?

Normally a couple of hours, then it needs to cure.

Do you work in Semington?

Yes. We cover the entire UK and travel to Semington. Send photos and we’ll quote, or call 0345 017 0787.

Can you price it without visiting?

Yes, almost always. Clear pictures let us give you a fixed price without visiting.

What areas do you cover?

We work UK-wide, so Semington is covered. Our prices are the same everywhere.

What bath resealing costs

We give every job a fixed price from pictures. These are the things that affect it:

  • Whether it’s a chip, crack, burn or wear
  • The size and number of damaged areas
  • Whether we combine several jobs
  • How hard the colour is to match

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from pictures

We price nearly every job from photos. This is what to send:

  • A photo taken from further back
  • Whether it’s been repaired or coated before
  • A coin or ruler next to the damage for scale
  • A close-up of the damage, in focus

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath or shower, we can price the job without visiting.

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

What happens on the day

Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. You can expect it to take around two hours.

  1. The old silicone is cut out completely.
  2. Residue is removed and the joint cleaned.
  3. Any mould is treated and the joint dried.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

Before we arrive

  • Let us know about parking or access
  • Make sure the area is dry
  • Mention any earlier repairs or resurfacing

Getting a price

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Get a fixed quote

Read more

For landlords and businesses

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will handle the rest.

Honest limits

A repair is not right for every job, including:

  • Gaps too big for silicone alone
  • Tiles that move, until they’re refixed
  • Movement in the bath or tray

If in doubt, send photos and we’ll say what we think.

What we work on

  • Kitchen worktops & sinks
  • Basins & vanity units
  • Shower trays & enclosures
  • Wet rooms
  • Baths

Aftercare tips

So the finish stays in good condition for years:

  • Reseal when black spots will not clean off
  • Let steam out after showers
  • Wipe the joints dry after use
  • Use the extractor fan

Use the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.

Damp below or loose tiles need checking quickly. It may be more than a reseal, and we will say if you need a builder or plumber.

Different materials, different repairs

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Baths

Baths are resealed with water in them, so the joint is at its widest.

Where we work around Semington

Semington is about 2 miles south-west of Melksham, in Wiltshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 425 places in Wiltshire, from the larger towns to small villages. You can also see our page for Birmingham, about 79 miles away.

Postcode districts we cover here: BA14. That includes homes on High Street, Highfield Close and Somerset Way and the roads around them. We also cover the places around Semington: Berryfield (1 mile north), Great Hinton (1 mile south-east), Ashton Common (1 mile south), Bowerhill (2 miles north-east) and The Stocks (2 miles east). Further out, we also cover Trowbridge (3 miles south-west), Chippenham (8 miles north), Calne (9 miles north-east), Devizes (7 miles east), Westbury (6 miles south) and Warminster (10 miles south).

What’s near Semington

In Semington, that means homes near The Somerset Arms, Melksham Oak Community School and St George's Church of England Primary School, among other places. The nearest railway station is Melksham station, roughly 2.5 miles north. Well-known places in the area include Castle Place Shopping Centre (3 miles south-west) and Avon Tyre Museum (2.5 miles north).

Map of Semington © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.