North Ayrshire · Scotland
Bath & shower resealing (mastic) in Pirnmill, North Ayrshire
Bath, shower and sink resealing with new mould-resistant silicone in Pirnmill, carried out at your home and guaranteed for a year.
- Mould you can’t clean out
- Unsealed corners
- A messy previous reseal
Our work in Pirnmill
Pirnmill is about 23 miles west of Saltcoats, in North Ayrshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Pirnmill is one of 53 places in North Ayrshire where we work. Our jobs stretch from Pirnmill to Glasgow (about 45 miles away).
Jobs in KA27 are booked in the same way as anywhere else. If you’re just outside Pirnmill, we cover Lochranza (6 miles north-east), Carradale (6 miles south-west), Pien (9 miles south), Shiskine (9 miles south) and Torbeg (9 miles south). Remote and island addresses take a little more planning, so it’s best to call first.
Near you in Pirnmill
In Pirnmill, that means homes near Pirnmill Church Of Scotland and the streets around them. Green spaces nearby include Loch Tanna and Tòrr Mòr.
Bath resealing in Pirnmill without replacing anything
Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. A typical reseal takes a couple of hours. Typical jobs include gaps by the taps and gaps in the seal, on basins & vanity units, wet rooms and baths.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Location
- Pirnmill (KA27)
- Area hub
- North Ayrshire
- Cover
- One year on every repair
- Quote
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
How it works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow around two hours. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- All the old sealant is cut out and removed.
- We clean the joint and treat any mould.
- The joint is dried thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, taps included.
Before we arrive
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Clear toiletries, mats and anything else from around the area
Ask for a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
What we can’t put right
A repair isn’t right for every job, for example:
- Movement in the bath or tray
- Very wide gaps that need a trim
- Water damage behind the bath that needs a builder
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Shower trays & enclosures
- Kitchen worktops & sinks
- Wet rooms
- Basins & vanity units
- Baths
More services for Pirnmill
Pirnmill: your questions answered
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across North Ayrshire.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do you cover Pirnmill?
Yes. We cover the whole UK and come to Pirnmill. Send photos and we’ll quote, or call 0345 017 0787.
Why does my sealant keep splitting?
Movement is the usual cause, or it was sealed with the bath empty. We fill the bath before sealing it.
How long does resealing take?
Around two hours for a bath, plus curing time.
Are there extra charges for Pirnmill?
There is no separate call-out charge. The fixed quote covers the visit and the work.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
Common problems we fix in Pirnmill
Most reseals are because of black mould. It grows into the silicone, so cleaning only removes the surface.
If you can see any of these, send us a picture:
- Sealant that is split or lifting
- An untidy old seal
- Leaks at the edges
- Gaps by the taps
Comparing quotes
- Whether the colour is mixed to match
- How long it needs to cure
- Who will actually do the work
- How changes to the job are handled
How we price bath resealing
We price every job individually, from your photos. The main factors are:
- Previous DIY repairs that have to come out
- The type of damage
- Where the damage is and how we get to it
- The colour and finish to match
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Getting a price from photos
When you take your pictures, a few simple things make all the difference:
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- A coin beside the damage so we can judge size
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower, we can price the job.
For landlords and businesses
We’re used to working with agents and managing companies. Just send photos, the address and how to get access.
If you manage property in Pirnmill, we will quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
Materials and what they mean for the repair
Baths
Baths are resealed with water in them, so the joint is at its widest.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Run the extractor fan during and after showers
- Air the room after use
- Store bottles on a shelf
- Give the seal a regular clean
Good ventilation is the best protection, and wipe the joints after use so mould struggles to take hold.
Damp below or loose tiles need checking quickly. There may be more going on, and we’ll say if you need a builder or plumber.
About our accreditations · Every repair comes with a one-year guarantee.
