Pembrokeshire · Wales
Bath Resealing in Port Lion
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Port Lion and across Pembrokeshire. Send photos for a free, fixed quote.
- Silicone coming away from the tiles
- Leaks at the edges
- An untidy old seal
How we handle bath resealing in Port Lion
The key to a good reseal is getting all of the old silicone out. Fresh sealant doesn’t stick to old, which is why many DIY jobs peel. If you’re dealing with a messy previous reseal and gaps by the taps, we can help.
You get a one-year guarantee, the same in Port Lion as everywhere else we work.
- Location
- Port Lion (SA62, SA73)
- Area hub
- Pembrokeshire
- Guarantee
- A year, on every repair
- Quotes
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Port Lion
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before and we will plan for it.
Why does mould come back so fast?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
Why does the silicone keep cracking?
The bath or tray is probably flexing. If it keeps happening, the support may need fixing.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you seal over the old sealant?
Never over old. It’s removed, cleaned off and the joint dried first.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
What happens next?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Why it’s worth resealing in Port Lion
Resealing costs very little. Leaving failed sealant can let water cause damage that costs far more to fix. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- A year’s guarantee on all work
- No need to remove anything
- One visit for most repairs
- We come to you, anywhere in the UK
Read our pricing.
Honest limits
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- Rotten walls or floors behind the bath
- Gaps so wide they need filling or trims before sealing
- A flexing bath
Send us pictures and we will tell you honestly.
Surfaces we repair
- Shower trays & enclosures
- Kitchen worktops & sinks
- Wet rooms
- Baths
- Basins & vanity units
Also near Port Lion
Also in Port Lion
Common problems we fix in Port Lion
A bathroom without good ventilation is hard on sealant: damp hangs around, and mould takes hold.
The most common problems we’re called about are:
- Unsealed corners
- Silicone coming away from the tiles
- Stained silicone
- An untidy old seal
Questions to ask before you book
- What happens if the damage is worse than the pictures show
- Whether the price covers travel
- What aftercare is recommended
- What preparation is included
About Port Lion
Port Lion is about 4 miles north of Pembroke Dock, in Pembrokeshire. Across the SA62 area, we carry out the work at your property. Port Lion is one of 223 towns and villages in Pembrokeshire we cover.
Every address in SA62 and SA73 is covered. Local streets include New Wells Road, Butterhill and River View, all of which we cover. Neighbouring places we cover include Foxhall (1 mile south-west), Llangwm (1 mile north), Newton Mountain (1 mile south-west), Hill Mountain (1 mile west) and Houghton (1 mile south-west). Further out, we also cover Haverfordwest (5 miles north-west), Milford Haven (5 miles west), Pembroke (4 miles south), Pembroke Dock (4 miles south), The Marsh (5 miles north-west) and Dinbych-y-Pysgod (10 miles south-east).
What’s near Port Lion
We visit homes around The Cottage Inn, Church of Saint Jerome and Cleddau Reach VC School, among other places. The closest station to Port Lion is Pembroke Dock station, roughly 3.3 miles south of the centre. Further afield, we also cover the area around Benton Castle (1.4 miles south-east) and South Pembrokeshire Hospital (3.7 miles south-west). Green spaces nearby include Lawrenny Hill and Pembroke River lower.
What your bath or shower is made of matters
Baths
Baths are resealed with water in them, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Landlord and trade work in Port Lion
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
What bath resealing costs
Each job gets its own fixed price. These are the things that affect it:
- What the surface is made of
- Unusual colours or finishes
- The size and number of damaged areas
- How easy the damage is to reach
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Getting a price from photos
We price nearly every job from photos. This is what we need:
- One picture of the whole bath or shower
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
If you are in Port Lion and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
The process
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a couple of hours.
- We cut out and remove all of the old sealant.
- We clean the joint and treat any mould.
- We ensure the joint is completely dry.
- We fill a bath with water before sealing so the gap is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
Getting ready for the visit
- Ensure the area is dry
- Let us know about parking or access
- Let us know if it has been repaired before
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
