Dorset · England

Bath Resealing in Pulham

Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Pulham. Free, fixed quotes from your photos.

  • Discoloured, yellow sealant
  • Leaks at the edges
  • An untidy old seal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Pulham

About our bath resealing in Pulham

Preparation is everything in a reseal: every bit of old silicone out, mould treated, the joint clean and dry. Only then does the new sealant go on, in a neat, continuous bead. We are often asked to fix leaks at the edges and silicone coming away from the tiles, on wet rooms, kitchen worktops & sinks and shower trays & enclosures.

All our work is covered by a one-year guarantee, wherever you are in Dorset.

Where
Pulham (DT2)
Area hub
Dorset
Cover
One year on every repair
Quotes
Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

FAQs for Pulham

When can I use the bath after resealing?

We’ll give you the curing time.

Is a repair better than a new one?

Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Do you come to Pulham?

Yes. We work across the UK and travel to Pulham. Send photos and we will quote, or call 0345 017 0787.

Is there a guarantee?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

How much does bath resealing cost in Pulham?

Because every job differs, we price from pictures. You’ll get a fixed figure before you book.

How long does a reseal take?

Most reseals take about two hours. Leave it to cure before use.

Can you repair something that is been repaired before?

Most of the time. Let us know what was used before and we’ll plan for it.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders across Dorset.

What we do, step by step

You do not need to empty the room beforehand. We bring everything we need with us, put protection down and get going once we’ve agreed what we are doing. It normally takes about two hours for a bath, and you can get on with other things while we are there.

  1. We cut out and remove all of the old sealant.
  2. Next we clean the joint and deal with mould.
  3. We ensure the joint is completely dry.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

How to prepare

  • Let us know about parking or access
  • Point us to the nearest place to park
  • Let us know which floor the room is on

Getting a price

The quickest way to a price is to send two or three photos using our quote form or ring us. We will say immediately whether it can be repaired.

Send pictures for a quote

Advice

Looking after it afterwards

Aftercare is simple:

  • Replace the seal when mould sets in
  • Keep the joints dry
  • Air the room after use
  • Run the extractor fan during and after showers

Run the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.

Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. An early reseal keeps water where it belongs.

Why reseal now?

Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why us?

  • Repair technicians who travel to you, UK-wide
  • Nothing taken out or refitted
  • CHAS and Constructionline accredited
  • Rooms protected and left tidy

Take a look at our full price list.

Materials and what they mean for the repair

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Landlords, agents and businesses in Pulham

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

For developers and builders, we fix damage before handover. We can visit several plots in one trip.

When we’d advise against a repair

A few problems are outside what a surface repair can do:

  • A flexing bath
  • Very wide gaps that need a trim
  • Rotten walls or floors behind the bath

If in doubt, send pictures and we will say what we think before booking.

Surfaces we repair

  • Wet rooms
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Baths
  • Basins & vanity units

Pulham and the surrounding area

Pulham is about 11 miles south-east of Yeovil, in Dorset. We visit customers in Pulham and the surrounding area, so nothing has to leave your home. Pulham is one of 462 places in Dorset we cover.

Postcode districts we cover here: DT2. Whether you live on Old Orchard, Meadow Vale and Halsey Green or a nearby road, we can come to you. Other places close to Pulham include Newland (1 mile west), Holwell (1 mile north), Pleck Green (2 miles north), Glanvilles Wootton (2 miles west) and Rew (2 miles south). Larger places within reach include Dorchester (11 miles south), Blandford Forum (11 miles east), Gillingham (13 miles north-east), Shaftesbury (14 miles north-east), Sherborne (7 miles north-west) and Fordington (11 miles south).

Around Pulham

Locally, our jobs take us to homes close to Parish Church of St Thomas A Becket. For a walk, there’s Bookham Knoll.

Map of Pulham © OpenStreetMap contributors

Signs you need bath resealing in Pulham

Even good sealant eventually discolours particularly in a well-used bathroom. Steam, soap and movement all wear it down.

Send us a photo if you notice any of these:

  • Silicone coming away from the tiles
  • Damp near the bath
  • Unsealed corners
  • Mould you cannot clean out

Questions to ask before booking

  • Whether they match the colour on site
  • How soon you can use it again
  • How to care for the finish
  • How the room is protected while they work

How to compare quotes

What bath resealing costs

There’s no area surcharge for Pulham. The price reflects:

  • How many areas need work
  • Doing more than one item at once
  • Any earlier repairs that need removing first
  • How hard the colour is to match

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Quotes from your photos

When you take your pictures, a few simple things make all the difference:

  • Whether it’s been repaired or coated before
  • Natural light rather than flash
  • Your postcode, so we can check dates
  • A close-up of the damage, in focus

If you’re in Pulham and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.