Wirral · England
Bath Resealing in Raby Mere
Bath, shower and sink resealing with new mould-resistant silicone at your home in Raby Mere, with a one-year guarantee on every repair.
- Old sealant that looks dirty
- Gaps by the taps
- An untidy old seal
How we price bath resealing
There are no hourly rates or hidden extras. The price is based on:
- Any earlier repairs that need removing first
- Access to the area
- How much damage there is
- What kind of damage it is
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before you book.
Send photos for a quote
Photographing the damage takes a minute. Please include:
- A wider photo showing the entire bath or shower
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower, add your postcode and send them over. You will get a fixed quote, not an estimate.
Bath resealing in Raby Mere, done in place
A fresh seal protects your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and resealing puts a stop to that. Whether it’s black spots in the silicone and silicone coming away from the tiles, we can generally put it right.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Raby Mere (CH63)
- Area hub
- Wirral
- Warranty
- One year on every repair
- Quotes
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Raby Mere
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
For anyone letting property in or around Raby Mere, we’ll quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
What your bath or shower is made of matters
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Baths
We fill the bath before sealing, so the joint is at its widest.
FAQs for Raby Mere
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
How do I stop mould in sealant?
Normally poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Why does my sealant keep splitting?
Typically because the bath or tray moves, or it was sealed with the bath empty. We fill the bath before sealing it.
How long does resealing take?
Generally a couple of hours, then it needs to cure.
Do you cover the whole of Wirral?
The entire UK, including all of Wirral. Just include your postcode and we will confirm dates.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Keeping it looking good
So the finish stays in good condition:
- Open a window after bathing
- Keep bottles off the joints
- Replace the seal when mould sets in
- Use the extractor fan
Run the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.
Damp below or loose tiles need checking quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.
What we cannot put right
Before you book, it’s worth knowing the limits too:
- Hollow or loose tiles
- Gaps so wide they need filling or trims before sealing
- A bath or tray that moves, until its support is fixed
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Raby Mere
- Shower trays & enclosures
- Baths
- Wet rooms
- Kitchen worktops & sinks
- Basins & vanity units
About Raby Mere
Raby Mere is about 1 mile south-west of Bromborough, in Wirral. Anywhere in CH63, we come to you. We cover all 44 towns and villages in Wirral, from the larger towns to small villages. We work right across the region, from Raby Mere to Liverpool (7 miles away).
Jobs in CH63 are booked in the same way as anywhere else. From Mere Avenue, Raby Avenue and Lawns Avenue or a nearby road, we can come to you. Other places close to Raby Mere include Bromborough (1 mile north-east), Bebington (2 miles north), Eastham (2 miles east), Eastham Ferry (2 miles east) and Bromborough Pool (2 miles north). We also work in nearby towns such as Birkenhead (5 miles north-west), Wallasey (7 miles north), Heswall (4 miles west), Moreton (7 miles north-west), West Kirby (8 miles north-west) and Greasby (7 miles north-west).
Local landmarks in Raby Mere
In Raby Mere, that means homes near South Wirral High School, The Merebrook pub and Chapel of Saint Peter, among other places. Other local landmarks include Marfords Park (within half a mile north-east) and Brookhurst Primary School (under half a mile east). For rail, the closest station is Bromborough station, about 0.5 miles east of the centre. A little further out are Clatterbridge Hospital (1.4 miles north-west) and Port Sunlight Museum (2.3 miles north). Open spaces near Raby Mere include New Ferry Butterfly Park and Princes Park lake.
- Other local spots include Municipal Borough of Bebington (2.1 miles north)
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Is resealing worth it?
Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- Rooms protected and left tidy
- No need to remove anything
- Accredited with CHAS, Constructionline and SafeContractor
- One price list for the whole UK
Read our pricing.
Also near Raby Mere
What else we do in Raby Mere
What happens on the day
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes about two hours for a bath, and we finish with a tidy-up and a look at the finished work together.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Before we arrive
- Mention any earlier repairs or resurfacing
- Let the surface dry out before the visit
- Point us to the nearest place to park
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and you are under no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
