Wirral · England

Bath Resealing in Bromborough Pool

Bath resealing in and around Bromborough Pool: photo quotes, tidy work and a year’s guarantee.

  • A messy previous reseal
  • Water getting behind the bath or tray
  • Sealant that is split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Bromborough Pool

Looking after it afterwards

Nothing complicated is needed, just a few sensible habits:

  • Keep the joints dry
  • Reseal at the first sign of lifting
  • Keep bottles off the joints
  • Air the room after use

Leave the sealant to cure for the time we give you, typically around 24 hours.

Black mould in sealant is not just unsightly; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.

Bath resealing in Bromborough Pool, done in place

A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, as one neat, continuous bead. If you’re dealing with gaps by the taps and water getting behind the bath or tray, we can normally put it right, on kitchen worktops & sinks, baths and wet rooms alike.

Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Technician in a mask working on a freestanding roll-top bath
Where
Bromborough Pool (CH62)
County
Wirral
Guarantee
12 months on all our work
Quotes
Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026

Covering Bromborough Pool

Bromborough Pool is about 1 mile north-east of Bebington, in Wirral. From the centre of Bromborough Pool to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in 44 places in Wirral.

We cover every part of the CH62 postcode area. From Pool Lane, Thermal Road and Dock Road South or a nearby road, a technician can come to you. If you’re just outside Bromborough Pool, we cover Port Sunlight (1 mile north-west), Bebington (1 mile south-west), Bromborough (1 mile south), Eastham Ferry (2 miles south-east) and Aigburth (2 miles north-east). Larger places within reach include Birkenhead (4 miles north-west), Wallasey (5 miles north-west), Heswall (5 miles west), Moreton (6 miles north-west), West Kirby (8 miles west) and Greasby (6 miles west).

Landmarks near Bromborough Pool

Around Bromborough Pool, we work in homes near Wellington School, St John Plessington Catholic College and Village pub, among other places. Also close by are Port Sunlight River Park (0.5 miles north), St Matthew's Church (within half a mile east) and Church Drive Primary School (0.7 miles west). The closest station to Bromborough Pool is Port Sunlight station, about 0.8 miles west. Well-known places in the area include Liverpool One (3.7 miles north) and Clatterbridge Hospital (2.2 miles south-west). For a walk, there’s New Ferry Butterfly Park and Princes Park lake.

  • Other local spots include Municipal Borough of Bebington (0.9 miles west)
Map of Bromborough Pool © OpenStreetMap contributors

When a repair isn’t the answer

Before booking, it’s worth knowing the limits:

  • Very wide gaps that need a trim
  • A bath or tray that moves, until its support is fixed
  • Loose tiles, which need refixing first

If in doubt, send photos and we will say what we think before booking.

What we work on

  • Shower trays & enclosures
  • Baths
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Wet rooms

How the visit works

Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for about two hours for a bath. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We cut out and remove all of the old sealant.
  2. We clean the joint and treat any mould.
  3. We dry the joint thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.

How to prepare

  • Tell us about any previous repairs or coatings
  • Make sure the room can be ventilated
  • Avoid using the area for a few hours before we arrive

Ask for a price

Upload a photo of the damage and a wider shot of the whole item, and tell us you’re in Bromborough Pool, and we will come back with a fixed quote.

Get a free quote

Advice

Work for landlords and builders

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

When to call us in Bromborough Pool

In time, even good sealant discolours, especially in a busy family bathroom. Steam, soap and movement all wear it down.

It’s worth getting a quote if you see:

  • An untidy old seal
  • Black spots in the silicone
  • Leaks at the edges
  • Gaps in the seal

Comparing quotes

  • What aftercare is recommended
  • What happens if they find more damage
  • Who turns up on the day
  • If travel is included in the price

Our hiring checklist

Questions from Bromborough Pool

Do you come to Bromborough Pool?

We do. Technicians travel to Bromborough Pool from across the region, and the price is the same as everywhere else.

What do you need from me?

Photos of the damage, a picture of the entire bath or shower and your postcode. After that, we just agree a date.

Is repairing better than replacing?

Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Is the work guaranteed?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Can you repair something that’s been repaired before?

Normally, yes. We remove the old repair before doing a new one, so mention it when you send photos.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

What happens once I’ve sent photos?

We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.

DIY kit or professional repair?

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

What your bath or shower is made of matters

Shower trays

We put weight on a tray before sealing it, for the same reason.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

What bath resealing costs

Every quote is fixed and free. What we take into account:

  • How many areas need work
  • The type of damage
  • Whether old repairs or coatings need taking off
  • Unusual colours or finishes

There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Send pictures for a quote

You can take the photos on your phone, there is no need for anything special. Just ensure we can see:

  • Details of any past repairs
  • The material, if you know it
  • A wider photo showing the entire bath or shower
  • Daylight if possible, and no flash reflection

We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.