Kent · England
Bath Resealing for Ringlestone homes
We travel to Ringlestone for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- Damp near the bath
- A messy previous reseal
- Gaps in the seal
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Clean the joints with a mild cleaner
- Run the extractor fan during and after showers
- Let steam out after showers
- Store bottles on a shelf
Run the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we’ll tell you if it needs a builder or plumber.
About our bath resealing in Ringlestone
All of the old sealant is cut out, treat any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. We are often asked to fix a messy previous reseal and leaks at the edges, on basins & vanity units, wet rooms and baths.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Ringlestone (ME14, ME16)
- Region
- Kent
- Warranty
- 12 months on all our work
- Quote
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Why it’s worth resealing in Ringlestone
A reseal is one of the cheapest bathroom jobs there is and protects the walls and floor. Failed sealant can lead to water damage that is much more expensive. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why us?
- CHAS and Constructionline accredited
- Fixed prices from your pictures
- Most jobs done in one visit
- Every repair guaranteed for a year
Take a look at our prices page.
Ringlestone and nearby
Ringlestone is about 2 miles north of Maidstone, in Kent. From the centre of Ringlestone to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 922 towns and villages in Kent. You can also see our page for London, about 30 miles away.
Every address in ME14 and ME16 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Hyde Road, Mill Lane and Edna Road. Neighbouring places we cover include Sandling (1 mile north), Abbey Gate (1 mile north), Foley Park (1 mile south-east), Penenden Heath (1 mile south-east) and Harbourland (1 mile east). We also work in nearby towns such as Sittingbourne (10 miles east), Sevenoaks (14 miles west), Royal Tunbridge Wells (15 miles south-west), Gravesend (11 miles north-west), Tonbridge (12 miles south-west) and Northfleet (12 miles north-west).
What’s near Ringlestone
Typical jobs here are in homes near Whatman Park, Harvester pub and Maidstone Grammar School for Girls. Also close by are St. Simon Stock Catholic School (1.4 miles south-west), North Borough Junior School (0.5 miles south-east) and St Paul's Church (0.7 miles south-east). Ringlestone’s nearest station is Maidstone Barracks station, about 0.8 miles south. Nearby you’ll also find Maidstone Hospital (1.7 miles south-west) and Fremlin Walk (1 mile south). The countryside around Ringlestone includes Burham Down and Boxley Hills.
What we’re called out for in Ringlestone
Poor ventilation speeds things up: moisture sits on the joints longer, and mould grows faster.
It’s worth getting a quote if you see:
- Missing sealant behind the taps
- Black spots in the silicone
- Leaks at the edges
- A messy previous reseal
Before you book anyone
- The length of the guarantee and what it covers
- How the room is protected while they work
- What preparation is included
- Whether there are any call-out or travel charges
How it works
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take about two hours for a bath, and we leave the room as we found it.
- The surrounding area is protected and the joints masked.
- Old sealant and residue are removed.
- We clean, treat and dry the joint.
- We run a continuous bead of new silicone.
- The bead is smoothed, the tape removed and the seal left to cure.
Preparing for the visit
- Let us know which floor the room is on
- Ensure the room can be ventilated
- Mention any parking restrictions or tricky access
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Hollow or loose tiles
- Very wide gaps that need a trim
- Rotten walls or floors behind the bath
Send us photos and we’ll tell you honestly before booking.
Materials we repair
- Wet rooms
- Shower trays & enclosures
- Kitchen worktops & sinks
- Baths
- Basins & vanity units
Ringlestone: your questions answered
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Is there any odour?
Expect a mild smell while we’re working.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
My seal keeps tearing. Why?
Movement is the usual cause, or it was sealed with the bath empty. We fill the bath before sealing it.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Do you seal over the old sealant?
We always remove the old sealant completely. Fresh silicone does not stick to old.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Places near Ringlestone
More services for Ringlestone
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
What affects the price in Ringlestone
There are no hourly rates or hidden extras. The price is based on:
- Any earlier repairs that need removing first
- The type of damage
- The colour and finish to match
- How easy the damage is to reach
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
We price nearly every job from photos. This is what to send:
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- The material, if you know it
- Any earlier repairs or coatings
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Repairs by material
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Shower trays
We put weight on a tray before sealing it, for the same reason.
About our accreditations · Every repair comes with a one-year guarantee.
