Shropshire · England
Bath Resealing for Round Oak homes
Bath resealing in and around Round Oak: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Unsealed corners
- Silicone coming away from the tiles
- An untidy old seal
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Bath resealing at your home in Round Oak
Baths are resealed with water in them, so the joint is at its widest, so the seal does not tear when the bath is first used. Our repair technicians work on shower trays & enclosures, kitchen worktops & sinks and baths, and common reasons people contact us are sealant that’s split or lifting and damp near the bath.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.
- Where
- Round Oak (SY7)
- County
- Shropshire
- Cover
- A year, on every repair
- Quotes
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Round Oak
What else we do in Round Oak
When a repair isn’t the answer
We’ll always be straight with you, so here’s what a repair will not do:
- Water damage behind the bath that needs a builder
- A flexing bath
- Hollow or loose tiles
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Round Oak
- Kitchen worktops & sinks
- Basins & vanity units
- Baths
- Wet rooms
- Shower trays & enclosures
What your bath or shower is made of matters
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
Baths
We fill the bath before sealing, so the joint is at its widest.
Round Oak and the surrounding area
Round Oak is about 18 miles south of Shrewsbury, in Shropshire. Across the SY7 area, we carry out the work at your property. Round Oak is one of 433 towns and villages in Shropshire where we work. We work right across the region, from Round Oak to Birmingham (42 miles away).
Postcode districts we cover here: SY7. If you’re just outside Round Oak, we cover Basford (1 mile north-west), Long Meadowend (2 miles south-east), Aston on Clun (2 miles south), The Grove (2 miles east) and Wistanstow (2 miles east). Further out, we also cover Ludlow (10 miles south-east), Church Stretton (7 miles north-east), Bishop's Castle (5 miles north-west), Pontesbury (13 miles north), Clun (7 miles south-west) and Minsterley (13 miles north).
Near you in Round Oak
Locally, our jobs take us to homes close to Church of St Michael. The nearest railway station is Craven Arms station, about 2.3 miles south-east. Well-known places in the area include Land of Lost Content (2.6 miles south-east) and Edgton Ring-Motte (0.9 miles north-west). The countryside around Round Oak includes Burrow.
Looking after it afterwards
It’s all simple stuff:
- Ventilate the bathroom well
- Open a window after bathing
- Clean the joints with a mild cleaner
- Replace the seal when mould sets in
Leave the sealant to cure for the time we give you, normally around 24 hours.
Black mould in sealant isn’t just unsightly. An early reseal keeps water where it belongs.
What bath resealing costs
You won’t pay by the hour. The price is based on:
- The material and finish
- How much damage there is
- How hard the colour is to match
- Where the damage is and how we get to it
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send pictures for a quote
Most quotes are done from photos alone. To make it quick:
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- A wider photo showing the entire bath or shower
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Landlords, agents and businesses in Round Oak
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Round Oak: your questions answered
Is repairing better than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Shropshire.
What happens after I send photos?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
How do I get a price for bath resealing in Round Oak?
The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we will ask for another angle.
When to call us in Round Oak
Poor ventilation speeds things up: damp hangs around, and mould grows faster.
You may need us if you’ve spotted:
- A messy previous reseal
- Old sealant that looks dirty
- Unsealed corners
- Sealant that is split or lifting
What to look for in a quote
- How changes to the job are handled
- Whether there are any call-out or travel charges
- How long the guarantee is and what it covers
- How the room is protected while they work
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes about two hours for a bath. If we find something your photos didn’t show, we will explain it before carrying on.
- All the old sealant is cut out and removed.
- The joint is cleaned and any mould treated.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
How to prepare
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
- Make sure the area is dry
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
