Glasgow · Scotland
Bath & shower resealing (mastic) in Royston, Glasgow
Bath resealing across Royston and nearby, normally in one visit.
- Discoloured, yellow sealant
- Silicone coming away from the tiles
- An untidy old seal
How we handle bath resealing in Royston
The key to a good reseal is getting all of the old silicone out. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. Whether it’s old sealant that looks dirty and damp near the bath, we can generally put it right, on kitchen worktops & sinks, shower trays & enclosures and baths alike.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Royston (G21, G4, G31)
- Region
- Glasgow
- Cover
- One year on every repair
- Price
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Baths
We fill the bath before sealing, to open the joint fully.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Looking after it afterwards
Nothing complicated is needed:
- Reseal when black spots won’t clean off
- Keep the joints dry
- Use the extractor fan
- Air the room after use
Let it cure fully before using the bath or shower, normally about a day.
Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
Also near Royston
More services for Royston
When we’d advise against a repair
To be straight with you, some problems need a different fix:
- Movement in the bath or tray
- Very wide gaps that need a trim
- Water damage behind the bath that needs a builder
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Wet rooms
- Baths
- Kitchen worktops & sinks
- Basins & vanity units
- Shower trays & enclosures
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes around two hours. If anything looks different from your photos, we will talk to you before going ahead.
- All the old sealant is cut out and removed.
- The joint is cleaned and any mould treated.
- The joint is dried thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
Preparing for the visit
- Keep pets and children out of the room while we work
- Have somewhere for us to park nearby if possible
- Tell us if there are stairs or a lift
Getting a price
Send us photos of the damage and one of the entire item, and tell us you’re in Royston, and we will reply with a fixed price.
Related advice
How we price bath resealing
Each job gets its own fixed price. These are the things that affect it:
- The material
- The size and number of damaged areas
- Unusual colours or finishes
- Previous DIY repairs that have to come out
A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Send pictures for a quote
Before you send pictures, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- A wider photo showing the entire bath or shower
- Your postcode, so we can check dates
For a price in Royston, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Signs you need bath resealing in Royston
Joints split if the bath or tray moves, frequently because it was sealed with the bath empty.
Signs it’s time to call us include:
- Damp near the bath
- Discoloured, yellow sealant
- Silicone coming away from the tiles
- A messy previous reseal
Before booking anyone
- If travel is included in the price
- How the room is protected while they work
- Whether they match the colour on site
- Whether the price is fixed and includes VAT
Where we work around Royston
Royston is about 2 miles east of Woodlands, in Glasgow. Clients in Royston get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We work in 183 places across Glasgow, from the larger towns to small villages.
Postcode districts we cover here: G21, G4 and G31. From St James Road, Stirling Road and Pinkston Road or a nearby road, a technician can come to you. With the M8 and A8 close by, Royston is simple for us to get to. Nearby, we also work in Sighthill (1 mile north-west), Old Balornock (1 mile east), Blochairn (1 mile east), Townhead (1 mile south-west) and Germiston (1 mile east). Within a short drive, we also cover Dowanhill (3 miles west), Partickhill (3 miles west), Yorkhill (3 miles west), Kelvinside (3 miles west), Hyndland (3 miles west) and Wyndford (3 miles north-west).
Landmarks near Royston
Typical jobs here are in homes near 55-57 Cochrane Street pub, St. Roch's Secondary School and Andersonian Library, among other places. Also close by are Springburn Park (1.4 miles north), Townhead and Blochairn Parish Church (within half a mile south-east) and Our Lady of Good Counsel Church (0.6 miles south-east). The closest station to Royston is Barnhill station, about 0.7 miles north-east of the centre. Nearby you’ll also find Canniesburn Hospital (less than half a mile south) and Glasgow Royal Infirmary Museum (0.5 miles south). Not far away are Hogganfield Loch and Lenzie Moss.
Landlords, agents and businesses in Royston
If you manage property in Royston, we will quote for several properties at once. Just send photos for each address and we will price them together.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Royston: your questions answered
Will there be a smell?
There may be a mild smell during the work.
Do you cover Royston?
Yes. We cover the entire UK and travel to Royston. Send photos and we’ll quote, or call 0345 017 0787.
Can you reseal over the old silicone?
Never over old. It’s removed, cleaned off and the joint dried first.
Why does my sealant keep splitting?
Something is moving. If it keeps happening, the support may need fixing.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Glasgow.
What happens next?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Can you price it without visiting?
Nearly always. If photos do not show enough, we will ask for another angle.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
