Devon · England
Bath & shower resealing (mastic) in Sampford Chapple, Devon
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Sampford Chapple and across Devon. Send pictures for a free, fixed quote.
- Stained silicone
- Gaps in the seal
- Gaps by the taps
Bath resealing in Sampford Chapple without replacing anything
We reseal baths with them filled with water, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. If you are dealing with unsealed corners and discoloured, yellow sealant, we can typically put it right.
Every repair is covered by a one-year guarantee, wherever you are in Devon.
- Location
- Sampford Chapple (EX20)
- County
- Devon
- Guarantee
- A year, on every repair
- Price
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
In fairness, some problems need a different fix:
- Very wide gaps that need a trim
- A flexing bath
- Loose tiles, which need refixing first
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Wet rooms
- Basins & vanity units
- Baths
- Kitchen worktops & sinks
- Shower trays & enclosures
Landlords, agents and businesses in Sampford Chapple
We carry out planned and one-off repairs for housing associations and facilities teams in Devon and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Your questions about bath resealing in Sampford Chapple
It’s been repaired before. Can you still fix it?
Generally, yes. We remove the old repair before doing a new one, so let us know about it.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How do I stop mould in sealant?
Normally poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.
Can new silicone go over old?
Never over old. It’s removed, cleaned off and the joint dried first.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Also near Sampford Chapple
What else we do in Sampford Chapple
Sampford Chapple and nearby
Sampford Chapple is about 19 miles north-east of Tavistock, in Devon. Our repair technicians come to customers in Sampford Chapple and the surrounding area, so you don’t need to take anything anywhere. Sampford Chapple is one of 586 towns and villages in Devon where we work.
Jobs in EX20 work the same way as everywhere else we cover. We also travel to Sampford Courtenay (1 mile east), Belstone Corner (2 miles south), Stockley (4 miles south), Okehampton (4 miles south-west) and Sticklepath (4 miles south). Further out, we also cover Crediton (13 miles east), Great Torrington (14 miles north-west), Hatherleigh (6 miles west), Winkleigh (4 miles north), Chagford (10 miles south-east) and Moretonhampstead (12 miles south-east).
What’s near Sampford Chapple
We visit homes around Church of St Andrew. The nearest railway station is Okehampton Interchange station, roughly 3.6 miles south. A little further out are Millsome Castle (3.8 miles north-east) and Okehampton Community Hospital (4.1 miles south-west).
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Different materials, different repairs
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
What we do, step by step
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and we start. It normally takes around two hours, and we’ll tell you if anything changes.
- All the old sealant is cut out and removed.
- Next we clean the joint and deal with mould.
- The joint is dried thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.
Before we arrive
- Make sure the room can be ventilated
- Mention any parking restrictions or tricky access
- Clear the area around the damage
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Read more
What affects the price in Sampford Chapple
Every quote is fixed and free. What we take into account:
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- How hard the colour is to match
- Whether we combine several jobs
A repair is priced on what needs doing, not where you live. You will see the full price before you book, with no extras added later.
How to get a fixed quote
The better the pictures, the more accurate the price. Here’s what helps:
- Natural light rather than flash
- Whether it’s been repaired or coated before
- The material, if you know it
- A picture taken from further back
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
How to care for the repair
A little care keeps the finish looking good. Our advice:
- Let steam out after showers
- Don’t stand toiletries on the seal
- Keep the joints dry
- Reseal at the first sign of lifting
Keep the room well ventilated, and dry the joints after bathing to keep mould away.
Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. An early reseal keeps water where it belongs.
Resealing in Sampford Chapple: why it matters
Putting new silicone over old doesn’t last. It peels within weeks, and traps mould underneath. We remove the old sealant completely. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Rooms protected and left tidy
- A year’s guarantee on all work
- Everything repaired in place
- Generally one visit, start to finish
See our prices page.
About our accreditations · Every repair comes with a one-year guarantee.
