Shetland Islands · Scotland

Bath Resealing for Sandness homes

We travel to Sandness for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.

  • Stained silicone
  • Sealant that is split or lifting
  • Mould you can’t clean out
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Sandness

What your bath or shower is made of matters

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

How we handle bath resealing in Sandness

Baths are resealed with water in them, so the joint opens fully, so the seal doesn’t tear when the bath is first used. Typical jobs include leaks at the edges and old sealant that looks dirty, across wet rooms, shower trays & enclosures and basins & vanity units.

We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.

Roll-top bath being refinished by a Surface Doctor technician
Location
Sandness (ZE2)
Area hub
Shetland Islands
Guarantee
A year, on every repair
Quote
Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

Common problems we fix in Sandness

Poor ventilation speeds things up: moisture sits on the joints longer, and mould takes hold.

You may need us if you’ve spotted:

  • Black spots in the silicone
  • Stained silicone
  • Sealant that is split or lifting
  • Gaps by the taps

What to look for in a quote

  • How your room will be protected
  • The length of the guarantee and what it covers
  • What happens if the damage is worse than the pictures show
  • Whether the price covers travel

10 questions to ask before you book

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

Why reseal now?

Resealing costs very little and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • Accredited with CHAS, Constructionline and SafeContractor
  • A year’s guarantee on all work
  • Most jobs done in one visit
  • Nothing taken out or refitted

Take a look at our pricing.

Sandness questions

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

Will the price change on the day?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

Do you work in Sandness?

We do. We send a technician to Sandness for every job, and the price is the same as everywhere else.

Why does the silicone keep cracking?

Movement is the usual cause, or it was sealed with the bath empty. We fill the bath before sealing it.

Are there extra charges for Sandness?

There’s no separate call-out charge. The fixed quote covers the visit and the work.

How long does resealing take?

Around two hours for a bath, then it needs to cure.

Is repairing better than replacing?

Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Keeping it looking good

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Replace the seal when mould sets in
  • Let steam out after showers
  • Dry the seal after bathing
  • Store bottles on a shelf

Leave the sealant to cure for the time we give you, normally around 24 hours.

Mouldy sealant is more than a cosmetic problem, it’s a sign moisture is sitting in the joint. Resealing early keeps water out of the walls and floor.

What affects the price in Sandness

Every quote is fixed and free. What we take into account:

  • How much damage there is
  • Unusual colours or finishes
  • What the surface is made of
  • Whether old repairs or coatings need taking off

What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before you book.

Send pictures for a quote

The better the photos, the more accurate the price. Here’s what helps:

  • Any earlier repairs or coatings
  • What it’s made of, if you know
  • A wider photo showing the whole bath or shower
  • The postcode, so we can plan the visit

To get a price, send a couple of pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.

About Sandness

Sandness is in the Shetland Islands. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Sandness is one of 63 places in the Shetland Islands where we work.

Here we cover the ZE2 postcode area. Neighbouring places we cover include Melby (1 mile north-west), Walls (6 miles south-east), Aith (10 miles east), Easter Skeld (11 miles south-east) and Brae (12 miles north-east). Remote and island addresses take a little more planning, so it’s best to call first.

Around Sandness

In Sandness, that means homes near St Margaret's Kirk and Graveyard, among other places. Open spaces near Sandness include Loch of Norby.

Map of Sandness © OpenStreetMap contributors

When we would advise against a repair

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Very wide gaps that need a trim
  • A flexing bath
  • Loose tiles, which need refixing first

If in doubt, send pictures and we’ll say what we think before booking.

Materials we repair

  • Baths
  • Kitchen worktops & sinks
  • Wet rooms
  • Shower trays & enclosures
  • Basins & vanity units

The process

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow a couple of hours. Before leaving, we tell you how long to leave it and how to look after it.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. We clean, treat and dry the joint.
  4. We run a continuous bead of new silicone.
  5. We smooth the bead, remove the tape and leave it to cure.

Before we arrive

  • Have a window or extractor fan available
  • Let us know about parking or access
  • Move bottles, mats and clutter away from the area

How to get a price

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed price back. There’s no charge for the quote and you’re under no obligation.

Get a free quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.