Argyll and Bute · Scotland
Bath & shower resealing (mastic) in Shandon, Argyll and Bute
Bath resealing in and around Shandon: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Unsealed corners
- Mould you can’t clean out
- Discoloured, yellow sealant
Repairs by material
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Baths
We fill the bath before sealing, so the joint is at its widest.
About our bath resealing in Shandon
A reseal is a small job that makes a big difference. Fresh joints make the whole room look cleaner, and they keep water out. Typical jobs include sealant that’s split or lifting and black mould in the sealant, across kitchen worktops & sinks, basins & vanity units and baths.
All our work comes with a one-year guarantee, wherever you are in Argyll and Bute.
- Location
- Shandon (G84)
- Area hub
- Argyll and Bute
- Warranty
- 12 months on all our work
- Price
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Shandon
Sealant does not last forever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint moves slightly every time the bath is filled.
Most people get in touch after spotting one of these:
- Silicone smeared on tiles
- Missing sealant behind the taps
- Black spots in the silicone
- Old sealant that looks dirty
What your quote should include
- Whether cleaning and preparation are in the price
- Who will actually do the work
- How long the guarantee is and what it covers
- If travel is included in the price
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Air the room after use
- Give the seal a regular clean
- Reseal at the first sign of lifting
- Store bottles on a shelf
Let it cure fully before using the bath or shower, normally about a day.
Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. An early reseal keeps water where it belongs.
Other services in Shandon
Where we work around Shandon
Shandon is about 3 miles north-west of Helensburgh, in Argyll and Bute. From the centre of Shandon to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Our technicians cover 118 places in Argyll and Bute, from the larger towns to small villages. We work right across the region, from Shandon to Glasgow (about 24 miles away).
Our visits in G84 work the same way as everywhere else we cover. Local streets include Station Road, Gareloch Brae and Kings Point, all of which we cover. We also cover the places around Shandon: Clynder (1 mile south-west), Rhu (1 mile south-east), Rahane (2 miles north-west), Rosneath (2 miles south) and Mambeg (3 miles north-west). Further out, we also cover Helensburgh (3 miles south-east), Dunoon (8 miles south-west), Garelochhead (4 miles north), Sandbank (7 miles south-west) and Innellan (12 miles south-west).
Around Shandon
Our clients here include homes close to Parish Church. Shandon’s nearest station is Helensburgh Upper station, roughly 3 miles south-east. Other landmarks nearby include Scottish Submarine Centre (3.2 miles south-east) and Victoria Infirmary (3.9 miles south-east).
Work for landlords and builders
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
What affects the price in Shandon
We do not charge extra for travel to Shandon. The price depends on:
- The material
- Unusual colours or finishes
- Whether we combine several jobs
- How easy the damage is to reach
A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Send photos for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- The material, if you know it
- Any earlier repairs or coatings
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed price the same day in most cases.
What a repair can’t fix
Before you book, it’s worth knowing the limits too:
- Hidden water damage
- Gaps too big for silicone alone
- Tiles that move, until they’re refixed
Send us pictures and we will tell you honestly.
Surfaces we repair
- Wet rooms
- Baths
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & sinks
The process
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to around two hours, tidy-up included.
- We cut out and remove all of the old sealant.
- We clean the joint and treat any mould.
- The joint is dried thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.
How to prepare
- Mention any earlier repairs or resurfacing
- Let the surface dry out before the visit
- Tell us about parking, stairs or access
Getting a price
Upload photos of the damage and a wider shot of the entire item, and tell us you’re in Shandon, and we will come back with a fixed quote.
Advice
Shandon questions
Do you work in Shandon?
We do. We send a technician to Shandon for every job, and the price is the same as everywhere else.
How long does a reseal take?
A bath or shower typically takes a couple of hours. Leave it to cure before use.
What areas do you cover?
The entire UK, including all of Argyll and Bute. Just include your postcode and we’ll confirm dates.
My seal keeps tearing. Why?
Something is moving. If it keeps happening, the support may need fixing.
What happens after I send photos?
You’ll get a fixed quote back, plus dates. There’s no obligation to book.
Why does mould come back so fast?
Mould needs moisture. Ventilation and drying keep it clean longer.
How long does silicone take to cure?
You’ll get the curing time from us, usually around a day.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
About our accreditations · Every repair comes with a one-year guarantee.
