Wirral · England
Bath & shower resealing (mastic) in Spital, Wirral
Our technicians come to Spital for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.
- Old sealant that looks dirty
- Gaps by the taps
- Sealant that’s split or lifting
Bath resealing in Spital without replacing anything
We reseal baths, shower trays, basins and worktops. Most jobs take a couple of hours. We regularly repair basins & vanity units, shower trays & enclosures and kitchen worktops & sinks, and people most frequently call us about gaps by the taps and black spots in the silicone.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Spital (CH63, CH62)
- Area hub
- Wirral
- Cover
- One year on every repair
- Price
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Spital
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
How do I get a price for bath resealing in Spital?
Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your CH63 postcode.
Do you seal over the old sealant?
All the old sealant comes out. Fresh silicone doesn’t stick to old.
How do I stop mould in sealant?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
Can you quote from pictures?
Normally, yes. Clear pictures let us give you a fixed price without visiting.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
How the visit works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes about two hours for a bath. We clean up when we’re done and let you know when you can use it again.
- We protect the area and mask the joint lines.
- Old sealant and residue are removed.
- The joint is cleaned, treated and dried.
- Fresh silicone is applied in a continuous bead.
- We smooth the bead, remove the tape and leave it to cure.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
- Avoid using the area for a few hours before we arrive
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Read more
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Clean the joints with a mild cleaner
- Keep bottles off the joints
- Let steam out after showers
- Wipe the joints dry after use
Run the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
Damp below or loose tiles need checking quickly. There may be more going on, so we will tell you if it needs a builder or plumber.
Materials and what they mean for the repair
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Baths
Baths are resealed with water in them, so the joint is at its widest.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Honest limits
We’d rather lose a job than do one that will not last, so these are the limits:
- Very wide gaps that need a trim
- Hidden water damage
- Loose tiles, which need refixing first
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Spital
- Baths
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & sinks
- Wet rooms
Other services in Spital
Where we work around Spital
Spital is about 1 mile west of Bebington, in Wirral. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We work in all 44 towns and villages in Wirral.
Our repair technicians cover all of CH63 and CH62 and the streets around it. We regularly work on streets such as Inley Road, Birch Road and Tyburn Road. Nearby, we also work in Poulton (1 mile south-west), Lower Bebington (1 mile north), Clatterbridge (1 mile south-west), Higher Bebington (1 mile north-west) and Brimstage (2 miles west). We also work in nearby towns such as Birkenhead (3 miles north-west), Wallasey (6 miles north), Heswall (4 miles west), Moreton (6 miles north-west), West Kirby (7 miles west) and Greasby (6 miles north-west).
Near you in Spital
Typical jobs here are in homes near Wirral Grammar School for Boys, Poulton Lancelyn Primary School and Three Stags pub and the streets around them. Other local landmarks include Marfords Park (1.2 miles south), Wellington School (1 mile north) and St Andrew's Church (0.5 miles north). Spital has its own railway station: Spital station. Further afield, we also cover the area around Port Sunlight Museum (0.9 miles north) and Municipal Borough of Bebington (0.6 miles north). For a walk, there’s Bidston Hill and Princes Park lake.
Landlord and trade work in Spital
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What we are called out for in Spital
No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint moves slightly every time the bath is filled.
Look out for these signs:
- Missing sealant behind the taps
- Gaps in the seal
- Damp near the bath
- Old sealant that looks dirty
Questions to ask before booking
- What happens if they find more damage
- Aftercare advice
- How the room is protected while they work
- What the guarantee covers, and for how long
What bath resealing costs
Quotes are free and the price is fixed. What we look at:
- How hard the colour is to match
- What kind of damage it is
- Doing more than one item at once
- How easy the damage is to reach
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
How to get a fixed quote
Most quotes are done from photos alone. To make it quick:
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- What it’s made of, if you know
- Details of any past repairs
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
