Derbyshire · England
Bath Resealing in Stanton-by-Dale
We travel to Stanton-by-Dale for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, with a one-year guarantee.
- Unsealed corners
- Silicone smeared on tiles
- Damp near the bath
Stanton-by-Dale: your questions answered
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
Do you seal over the old sealant?
All the old sealant comes out. New silicone will not bond to old.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
How do I stop mould in sealant?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
Why does my sealant keep splitting?
The bath or tray is probably flexing. If it keeps happening, the support may need fixing.
Do you cover the entire of Derbyshire?
Everywhere in the UK, Stanton-by-Dale included. Travel is included in the price.
What happens after I send pictures?
You will get a fixed quote back, plus dates. You’re under no obligation.
Bath resealing in Stanton-by-Dale, done in place
We cut out all of the old sealant, treat any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. Our repair technicians work on basins & vanity units, shower trays & enclosures and kitchen worktops & sinks, and common reasons people contact us are discoloured, yellow sealant and leaks at the edges.
All our work is covered by a one-year guarantee.
- Area
- Stanton-by-Dale (DE7)
- County
- Derbyshire
- Warranty
- A year, on every repair
- Quotes
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Resealing in Stanton-by-Dale: why it matters
Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
What you get with us
- Most jobs done in one visit
- Straight answers about what a repair can do
- Accredited with CHAS, Constructionline and SafeContractor
- No need to remove anything
See our full price list.
Materials and what they mean for the repair
Baths
Baths are resealed with water in them, to open the joint fully.
Shower trays
Trays are sealed with weight on them, for the same reason.
Landlord and trade work in Stanton-by-Dale
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
Towns and villages near Stanton-by-Dale
More services for Stanton-by-Dale
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Prices and what affects them
You’ll know the full cost before you book. We take into account:
- The type of damage
- The material
- How many areas need work
- How easy the damage is to reach
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Where you are, by postcode
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- The material, if you know it
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
About Stanton-by-Dale
Stanton-by-Dale is about 2 miles south of Ilkeston, in Derbyshire. Whether you are in the middle of Stanton-by-Dale or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover 532 places across Derbyshire, from the larger towns to small villages. You can also see our page for Birmingham, about 40 miles away.
All of DE7 is within our area, from the main roads to the quietest streets. Local streets include Stanhope Street, Flake Lane and Pepper Lane. Other places close to Stanton-by-Dale include Risley (1 mile south), Kirk Hallam (1 mile north-west), Dale Abbey (2 miles west), Ilkeston (2 miles north) and Ockbrook (3 miles south-west). Further out, we also cover Swadlincote (15 miles south-west), Long Eaton (3 miles south), Belper (9 miles north-west), Heanor (6 miles north), Ripley (9 miles north-west) and Langley Mill (6 miles north).
What’s near Stanton-by-Dale
Around Stanton-by-Dale, we work in homes near Cloudside Academy, The Stanhope Arms and Friesland School and the streets around them. The closest station to Stanton-by-Dale is Ilkeston station, roughly 2.9 miles north. Well-known places in the area include Museum of the Mercian Regiment (3.2 miles south-east) and Ilkeston Hospital (3.5 miles north). Green spaces nearby include Attenborough Nature Reserve.
How the visit works
We agree an arrival time beforehand, so you’re not left guessing. Once we are there, the work takes around two hours for most jobs. The room is left tidy and ready to use once it has cured.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
Before we arrive
- Let us know about parking or access
- Keep a parking space free if you can
- Clear the area around the damage
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Read more
Keeping it looking good
Looking after the surface is easy:
- Keep the joints dry
- Air the room after use
- Clean the sealant gently and regularly
- Run the extractor fan during and after showers
Let it cure fully before using the bath or shower, normally about a day.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we’ll tell you if it needs a builder or plumber.
Signs you need bath resealing in Stanton-by-Dale
Joints split if the bath or tray moves, often because it was sealed while the bath was empty.
Send us a picture if you notice any of these:
- Mould you can’t clean out
- Stained silicone
- Leaks at the edges
- Gaps by the taps
What to look for in a quote
- What preparation is included
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
- How the room is protected while they work
About our accreditations · Every repair comes with a one-year guarantee.
