Warwickshire · England

Bath & shower resealing (mastic) in Stockingford, Warwickshire

Bath, shower and sink resealing with new mould-resistant silicone at your home in Stockingford, with a one-year guarantee on every repair.

  • Mould you cannot clean out
  • Gaps in the seal
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Stockingford

Your questions about bath resealing in Stockingford

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

How do I stop mould in sealant?

Damp is the cause. Ventilation and drying keep it clean longer.

Do you seal over the old sealant?

We always remove the old sealant completely. New silicone won’t bond to old.

How long does silicone take to cure?

You’ll get the curing time from us.

What does bath resealing cost?

We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your CV10 postcode.

Can you do more than one item on the same visit?

Of course, and it normally saves money. Send pictures of everything together and you’ll get one combined price.

Does someone need to be in?

Someone needs to let us in and show us the job. You do not need to watch us work.

Is it OK to have pets in the house?

Just keep them out of the work area. We’ll let you know when it’s safe to use again.

Bath resealing in Stockingford without replacing anything

We cut out all of the old sealant, treat any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. We are often asked to fix missing sealant behind the taps and black spots in the silicone, across kitchen worktops & sinks, wet rooms and baths.

Whatever the size of the job, it’s backed by a one-year guarantee.

Where
Stockingford (CV10)
County
Warwickshire
Warranty
One year on every repair
Price
Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

What your bath or shower is made of matters

Baths

We fill the bath before sealing, to open the joint fully.

Shower trays

Trays are sealed with weight on them, for the same reason.

What we’re called out for in Stockingford

Sealant splits when the bath or tray moves, frequently because it was sealed with the bath empty.

The most common problems we are called about are:

  • A messy previous reseal
  • Gaps in the seal
  • Gaps by the taps
  • Stained silicone

Comparing quotes

  • How changes to the job are handled
  • How long the guarantee is and what it covers
  • Whether the price is fixed and includes VAT
  • Whether the price covers travel

Our hiring checklist

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Prices and what affects them

Quotes are free and the price is fixed. What we look at:

  • Unusual colours or finishes
  • Whether old repairs or coatings need taking off
  • How many areas need work
  • What the surface is made of

A repair is priced on what needs doing, not your postcode. The full price is agreed before booking.

Getting a price from photos

Almost every job we do is priced from pictures. This is what to send:

  • One sharp close-up of the damage
  • Natural light rather than flash
  • A coin beside the damage so we can judge size
  • Where you are, by postcode

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

What happens on the day

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes around two hours. If we find something your photos didn’t show, we will explain it before carrying on.

  1. The old silicone is cut out completely.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. New mould-resistant silicone is applied and tooled neatly.

How to prepare

  • Keep a parking space free if you can
  • Tell us about parking, stairs or access
  • Tell us about any previous repairs or coatings

Get a quote

For a price in Stockingford, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Get a free quote

Related advice

Why it’s worth resealing in Stockingford

Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why choose Surface Doctor in Stockingford

  • CHAS, Constructionline and SafeContractor accredited
  • Free fixed quotes from pictures
  • One visit for most repairs
  • No extra charge for your area

Take a look at our prices page.

Keeping it looking good

It’s all simple stuff, just a few sensible habits:

  • Reseal when black spots won’t clean off
  • Give the seal a regular clean
  • Store bottles on a shelf
  • Run the extractor fan during and after showers

Let it cure fully before using the bath or shower, normally about a day.

Mouldy sealant is more than a cosmetic problem. Resealing early keeps water out of the walls and floor.

Work for landlords and builders

We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.

Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Stockingford and the surrounding area

Stockingford is about 2 miles west of Nuneaton, in Warwickshire. Jobs in Stockingford are booked in like any other job: a fixed price from your photos, then a visit to do the work. Our technicians cover all 324 towns and villages across Warwickshire. Our jobs stretch from Stockingford to Birmingham (16 miles away).

Our visits in CV10 are booked in the same way as anywhere else. Streets in the area include Bede Road, Grove Road and Ansley Road, all of which we cover. If you’re just outside Stockingford, we cover Camp Hill (1 mile north-east), Galley Common (1 mile west), Ansley Common (2 miles north-west), Hartshill (2 miles north) and Astley (2 miles south-west). Larger places within reach include Rugby (15 miles south-east), Bedworth (3 miles south), Kenilworth (12 miles south), Fordbridge (10 miles west), Atherstone (4 miles north) and Castle Vale (12 miles west).

Near you in Stockingford

We visit homes around Hartshill School, St Paul's Church and Sutton Park. You will also find The Royal Oak pub (within half a mile south-east), St Paul's CofE Primary School (within half a mile south-west) and St Thomas More Catholic School and Sixth Form College (1.2 miles east). For rail, the closest station is Bermuda Park station, about 2 miles south-east. Well-known places in the area include George Eliot Hospital (1.6 miles south-east) and Ropewalk Shopping Centre (1.7 miles east).

Map of Stockingford © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.