Argyll and Bute · Scotland
Bath Resealing for Strone homes
We travel to Strone for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.
- Black mould in the sealant
- Gaps in the seal
- Damp near the bath
Strone and nearby
Strone is about 6 miles north-west of Greenock, in Argyll and Bute. Across the PA23 area, we come to you. Our repair technicians cover 118 places across Argyll and Bute. You can also see our page for Glasgow, about 26 miles away.
Jobs in PA23 are booked in the same way as anywhere else. Whether you live on High Road, Shore Road and Westfield or a nearby road, we can come to you. If you are just outside Strone, we cover Hunters Quay (1 mile south), Sandbank (1 mile west), Kilmun (2 miles north-west), Kirn (2 miles south) and Dunoon (2 miles south). Within a short drive, we also cover Helensburgh (7 miles east), Rothesay (12 miles south-west), Rhu (5 miles north-east), Garelochhead (7 miles north-east), Port Bannatyne (11 miles south-west) and Innellan (7 miles south). Remote and island addresses take a little more planning, so call us to arrange it.
Near you in Strone
Typical jobs here are in homes near Dunoon Grammar School and Strone Church, among other places. The closest station to Strone is Gourock station, about 3.8 miles south-east. A little further out are Cowal Community Hospital (2.1 miles south-west) and Castle House Museum (2.9 miles south). Green spaces nearby include Lyle Hill and Loch Loskin.
About our bath resealing in Strone
The key to a good reseal is getting all of the old silicone out. New silicone won’t bond to old, which is why many DIY jobs peel. Common call-outs are for stained silicone and unsealed corners, in shower trays & enclosures, baths and wet rooms.
All our work comes with our one-year guarantee.
- Where
- Strone (PA23)
- County
- Argyll and Bute
- Cover
- A year, on every repair
- Price
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Each job gets its own fixed price. This is what makes a difference:
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- Unusual colours or finishes
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from photos
Before you send pictures, these tips help us give you a firm price:
- One sharp close-up of the damage
- Your postcode, so we can check dates
- What it’s made of, if you know
- Details of any past repairs
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Keeping it looking good
To keep it looking its best:
- Keep the joints dry
- Reseal when black spots won’t clean off
- Give the seal a regular clean
- Let steam out after showers
Keep the room well ventilated, and dry the joints after bathing.
Mouldy sealant is more than a cosmetic problem. An early reseal keeps water where it belongs.
Do you need bath resealing in Strone?
Sealant doesn’t last forever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint moves slightly every time the bath is filled.
Clients generally contact us about:
- Silicone smeared on tiles
- Missing sealant behind the taps
- Mould you cannot clean out
- Leaks at the edges
Before you book anyone
- The length of the guarantee and what it covers
- How the room is protected while they work
- How the colour is matched
- How to care for the finish
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Questions from Strone
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What does bath resealing cost?
Every job gets a fixed quote from your pictures. Send a close-up and a photo of the entire item with your PA23 postcode.
How long does silicone take to cure?
You’ll get the curing time from us, normally around a day.
Can you reseal over the old silicone?
No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you come to Strone?
Yes. We cover the whole UK and travel to Strone and the rest of Argyll and Bute. Send pictures and we’ll quote, or call 0345 017 0787.
Why does my sealant keep going mouldy?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
Repairs by material
Baths
We fill the bath before sealing, so the joint is at its widest.
Shower trays
We put weight on a tray before sealing it, for the same reason.
Towns and villages near Strone
What else we do in Strone
Resealing in Strone: why it matters
Resealing costs very little. Leaving failed sealant can let water cause damage that costs far more to fix. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why book with us
- Free fixed quotes from pictures
- One price list for the entire UK
- Rooms protected and left tidy
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes around two hours. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We cut out all of the old sealant.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
Before we arrive
- Let us know which floor the room is on
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
Getting a price
Upload a picture of the damage and a wider shot of the whole item, and tell us you’re in Strone, and we’ll reply with a fixed quote.
Read more
What we cannot put right
Some jobs are not right for a repair, for example:
- Gaps so wide they need filling or trims before sealing
- Water damage behind the bath that needs a builder
- Movement in the bath or tray
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & sinks
- Basins & vanity units
- Baths
About our accreditations · Every repair comes with a one-year guarantee.
