Hampshire · England

Bath Resealing for Tapnage homes

Bath resealing across Tapnage and nearby, typically in one visit.

  • Unsealed corners
  • Water getting behind the bath or tray
  • An untidy old seal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Tapnage homes

What we are called out for in Tapnage

Sealant does not last forever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint flexes each time the bath fills.

Most people contact us after spotting something like this:

  • Old sealant that looks dirty
  • Leaks at the edges
  • Mould you can’t clean out
  • Gaps by the taps

What to look for in a quote

  • What the guarantee covers, and for how long
  • Whether there are any call-out or travel charges
  • When it can be used again
  • What preparation is included

10 questions to ask before booking

How we handle bath resealing in Tapnage

Resealing is one of the simplest ways to protect your bathroom. Failed sealant lets water get where it shouldn’t, and resealing puts a stop to that. Common call-outs are for leaks at the edges and missing sealant behind the taps, in kitchen worktops & sinks, baths and wet rooms.

Your repair is guaranteed for a year, as with every job we do.

Roll-top bath being refinished by a Surface Doctor technician
Area
Tapnage (PO17)
County
Hampshire
Guarantee
One year on every repair
Quote
Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Covering Tapnage

Tapnage is about 3 miles north of Fareham, in Hampshire. Anywhere in PO17, a technician comes to you. We work in all 683 towns and villages across Hampshire, from the larger towns to small villages. You can also see our page for London, about 64 miles away.

Our repair technicians cover all of the PO17 postcode area. We also cover the places around Tapnage: Knowle (1 mile south-east), Funtley (1 mile south), Whiteley (2 miles west), Burridge (2 miles west) and Segensworth (2 miles south-west). Further out, we also cover Winchester (12 miles north), Gosport (7 miles south-east), Havant (10 miles east), Eastleigh (8 miles north-west), Fareham (3 miles south) and Horndean (9 miles east).

What’s near Tapnage

Our customers here include homes close to The Henry Cort Community College. The closest station to Tapnage is Swanwick station, about 2.4 miles south-west of the centre. Further afield, we also cover the area around Knowle Hospital (0.9 miles south-east) and Fareham Shopping Centre (3.1 miles south-east). The countryside around Tapnage includes Swanwick Lakes.

Map of Tapnage © OpenStreetMap contributors

Aftercare tips

Much of the damage we repair could have been avoided. These habits help:

  • Air the room after use
  • Store bottles on a shelf
  • Dry the seal after bathing
  • Give the seal a regular clean

Use the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.

Black mould in sealant is not just unsightly; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.

Is resealing worth it?

Resealing is a small job. Leaving split or mouldy sealant can let water reach the walls and floor, and that damage costs much more to fix. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why us?

  • We leave the room as we found it
  • A year’s guarantee on all work
  • Accredited with CHAS, Constructionline and SafeContractor
  • One visit for most repairs

Take a look at our full price list.

Materials and what they mean for the repair

Shower trays

We put weight on a tray before sealing it, for the same reason.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

How the visit works

Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take about two hours for a bath, and the room is left clean and tidy.

  1. The surrounding area is protected and the joints masked.
  2. Old sealant and residue are removed.
  3. We clean, treat and dry the joint.
  4. We run a continuous bead of new silicone.
  5. We smooth the bead, remove the tape and leave it to cure.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Make sure the room can be ventilated
  • Keep a parking space free if you can

Getting a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Send photos for a quote

Advice

When a repair isn’t the answer

Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:

  • Tiles that move, until they’re refixed
  • Water damage behind the bath that needs a builder
  • Movement in the bath or tray

If in doubt, send pictures and we will say what we think before booking.

Materials we repair

  • Basins & vanity units
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Wet rooms
  • Baths

Should I try a DIY kit first?

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

Questions from Tapnage

What does bath resealing cost?

We give a fixed price from your pictures. Send a close-up and a photo of the whole item and your postcode.

Is there any odour?

It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.

Can you reseal over the old silicone?

Never over old. It’s removed, cleaned off and the joint dried first.

Can you redo someone else’s repair?

Most of the time. Let us know what was used before and we will plan for it.

Is repairing better than replacing?

Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

How do I stop mould in sealant?

Usually poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

How soon can you come?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

Landlord and trade work in Tapnage

Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.