Norfolk · England

Bath Resealing in Thurlton

Bath resealing in Thurlton without the cost of replacing. Get a fixed price from your pictures, then we come to you.

  • A messy previous reseal
  • Old sealant that looks dirty
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Thurlton homes

Bath resealing in Thurlton without replacing anything

Resealing is quick, but it transforms the look. Fresh joints make the entire room look cleaner, and they protect the walls and floor. Whether it’s silicone smeared on tiles and black spots in the silicone, we can help.

You are covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.

Location
Thurlton (NR14)
County
Norfolk
Guarantee
12 months on all our work
Price
Free and fixed, from your pictures
Call
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

How to care for the repair

Aftercare is simple:

  • Dry the seal after bathing
  • Let steam out after showers
  • Ventilate the bathroom well
  • Reseal when black spots won’t clean off

Let it cure fully before using the bath or shower, normally about a day.

Damp below or loose tiles need checking quickly. There may be more going on, and we’ll say if you need a builder or plumber.

How the visit works

There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take about two hours for a bath, tidy-up included.

  1. We cut out all of the old sealant.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

Before we arrive

  • Keep a parking space free if you can
  • Keep children and pets away from the room on the day
  • Mention any earlier repairs or resurfacing

Ask for a price

A quote takes minutes to ask for: photograph the damage, then the whole bath or shower, include your postcode and send them over. What comes back is a fixed quote, not a guess.

Get a free quote

Advice

About Thurlton

Thurlton is about 8 miles south-west of Gorleston-on-Sea, in Norfolk. Our technicians come to clients in Thurlton and nearby villages, so nothing has to leave your home. Our repair technicians cover 797 places in Norfolk.

Jobs in NR14 work the same way as everywhere else we cover. Local streets include Church Road, The Street and Links Way. Close by, we cover Norton Subcourse (1 mile north), Lower Thurlton (1 mile north-east), Raveningham (1 mile south-west), Nogdam End (2 miles north-west) and Haddiscoe (2 miles south-east). Larger places within reach include Norwich (14 miles north-west), Great Yarmouth (9 miles north-east), Gorleston-on-Sea (8 miles north-east), Sprowston (13 miles north-west), Thorpe St Andrew (12 miles north-west) and Southtown (8 miles north-east).

Local landmarks in Thurlton

Around Thurlton, we work in homes near Church of All Saints, The Queen's Head pub and Thurlton Primary School and the streets around them. The nearest railway station is Reedham (Norfolk) station, about 2.5 miles north. Well-known places in the area include Raveningham Motte (2.3 miles south-west) and Beccles and District War Memorial Hospital (5.2 miles south). Not far away are Fritton Lake.

Map of Thurlton © OpenStreetMap contributors

What we are called out for in Thurlton

Most reseals are because of black mould. It grows into the sealant itself, so cleaning only removes the surface.

Contact us if you’ve noticed:

  • Sealant that is split or lifting
  • Black spots in the silicone
  • Water getting behind the bath or tray
  • Unsealed corners

What to look for in a quote

  • How long it needs to cure
  • If travel is included in the price
  • The length of the guarantee and what it covers
  • What happens if the damage is worse than the photos show

How to compare quotes

Should I try a DIY kit first?

If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

Landlord and trade work in Thurlton

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

What we can’t put right

Some jobs aren’t right for a repair, for example:

  • Hollow or loose tiles
  • Gaps too big for silicone alone
  • Movement in the bath or tray

Send us pictures and we will tell you honestly before booking.

Surfaces we repair

  • Kitchen worktops & sinks
  • Wet rooms
  • Shower trays & enclosures
  • Basins & vanity units
  • Baths

How we price bath resealing

Each job gets its own fixed quote. These are the things that affect it:

  • The colour and finish to match
  • The size and number of damaged areas
  • The material and finish
  • Whether we combine several jobs

What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before you book.

Send photos for a quote

When you take your pictures, these tips help us give you a firm price:

  • The postcode, so we can plan the visit
  • Any earlier repairs or coatings
  • One picture of the whole bath or shower
  • A close-up of the damage, in focus

If you are in Thurlton and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Thurlton questions

Will there be a smell?

There can be some smell while we work, so we ventilate the room. It clears as the materials cure.

Why does the silicone keep cracking?

Normally because the bath or tray moves. We fill the bath before sealing it.

How do I stop mould in sealant?

Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.

Which areas do you work in?

Across the UK. Our prices are the same everywhere.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

What do you need from me?

Just photos, your postcode and a contact number. On the day, access to the room.

Do you come to Thurlton?

We do. Repair technicians travel to Thurlton from across the region, with no extra charge for travel.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Repairs by material

Baths

We fill the bath before sealing, so the joint is at its widest.

Shower trays

We put weight on a tray before sealing it, for the same reason.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.