Cornwall · England

Bath Resealing for Tremar Coombe homes

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Tremar Coombe and across Cornwall. Free, fixed quotes from your photos.

  • Old sealant that looks dirty
  • Damp near the bath
  • Gaps in the seal
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Tremar Coombe

How we price bath resealing

Each job gets its own fixed price. This is what makes a difference:

  • Whether old repairs or coatings need taking off
  • Whether we combine several jobs
  • What kind of damage it is
  • Unusual colours or finishes

Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Getting a price from pictures

Before you send pictures, these tips help us give you a firm price:

  • A close-up of the damage, in focus
  • Good light, ideally daylight, without flash glare
  • Any details about the material
  • A coin or ruler next to the damage for scale

Upload photos of the damage and a wider shot of the entire item, with your PL14 postcode, and we’ll reply with a fixed quote.

How we handle bath resealing in Tremar Coombe

Resealing is quick, but it transforms the look. Fresh joints make the entire room look cleaner, and they keep water out. If you are dealing with discoloured, yellow sealant and damp near the bath, we can normally put it right, on baths, wet rooms and basins & vanity units alike.

Every job is backed for twelve months. We return to put right any problem with the work.

Technician in a mask working on a freestanding roll-top bath
Where
Tremar Coombe (PL14)
Area hub
Cornwall
Guarantee
A year, on every repair
Quote
Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Why reseal now?

A professional reseal costs little compared with water damage. It’s quick, tidy and protects your home. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.

Why choose Surface Doctor in Tremar Coombe

  • We come to you, anywhere in the UK
  • Same prices wherever you are
  • Every repair guaranteed for a year
  • Normally one visit, start to finish

See our full price list.

Tremar Coombe and nearby

Tremar Coombe is about 2 miles north of Addington, in Cornwall. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Tremar Coombe is one of 644 towns and villages in Cornwall we cover.

Our visits in PL14 are booked in the same way as anywhere else. Whether you live on Well Lane, Chapel Row and Fernside Park or a nearby road, a technician can come to you. Other places close to Tremar Coombe include Tremar (1 mile south), St Cleer (1 mile south-west), Darite (1 mile north), Common Moor (1 mile north-west) and Trembraze (2 miles south). Further out, we also cover Bodmin (11 miles west), Saltash (12 miles south-east), Launceston (11 miles north-east), Looe (9 miles south), Torpoint (14 miles south-east) and Burraton Coombe (11 miles south-east).

Landmarks near Tremar Coombe

In Tremar Coombe, that means homes near St Cleer Primary Academy, The Crow's Nest pub and Church of St Clarus and the streets around them. Tremar Coombe’s nearest station is Liskeard station, roughly 3.1 miles south of the centre. Nearby you’ll also find Caradon (2.6 miles south) and Liskeard and District Museum (2.5 miles south). Open spaces near Tremar Coombe include Caradon Hill.

Map of Tremar Coombe © OpenStreetMap contributors

Keeping it looking good

So the finish stays in good condition:

  • Reseal at the first sign of lifting
  • Dry the seal after bathing
  • Store bottles on a shelf
  • Use the extractor fan

Keep the room well ventilated, and dry the joints after bathing.

Reseal before water gets in. Split or lifting sealant is a sign it’s time.

Materials and what they mean for the repair

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

What we do, step by step

Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes a couple of hours for most jobs. We leave the room clean and you’ll know when it can be used.

  1. We cut out and remove all of the old sealant.
  2. The joint is cleaned and any mould treated.
  3. The joint is dried thoroughly.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.

How to prepare

  • Make sure the area is dry
  • Keep pets and children out of the room while we work
  • Tell us if there are stairs or a lift

How to get a price

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath or shower, we can price the job without visiting.

Send photos for a quote

Read more

Common questions in Tremar Coombe

Is it OK to have pets in the house?

Just keep them out of the work area. We will tell you when the room can be used again.

Can you quote from pictures?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

Is there a guarantee?

Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.

Can new silicone go over old?

All the old sealant comes out. Fresh silicone does not stick to old.

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

Will there be a smell?

There can be some smell while we work. It clears as the materials cure.

Do I have to be there?

Yes. We need access to the room while we work, at a time we agree with you.

Why does my sealant keep going mouldy?

Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams in Cornwall and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.

When we’d advise against a repair

We’ll always be straight with you, so here’s what a repair can’t fix:

  • Gaps too big for silicone alone
  • Hidden water damage
  • A flexing bath

Send us photos and we will tell you honestly before booking.

What we work on

  • Shower trays & enclosures
  • Basins & vanity units
  • Kitchen worktops & sinks
  • Wet rooms
  • Baths

DIY kit or professional repair?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.