Cornwall · England
Bath & shower resealing (mastic) in Common Moor, Cornwall
We travel to Common Moor for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- Stained silicone
- Mould you cannot clean out
- Gaps in the seal
Why reseal now?
A reseal is one of the cheapest bathroom jobs there is, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. Our prices are the same across the UK, so there’s no premium for Common Moor. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- One visit for most repairs
- Fixed prices from your pictures
- Dust sheets down, tidy finish
- Nothing taken out or refitted
Read our prices page.
About our bath resealing in Common Moor
A proper reseal starts with removing every trace of the old silicone. New silicone will not bond to old, which is why so many DIY reseals peel. Our repair technicians work on shower trays & enclosures, kitchen worktops & sinks and basins & vanity units, and the jobs we see most are mould you can’t clean out and discoloured, yellow sealant.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Common Moor (PL14)
- County
- Cornwall
- Cover
- One year on every repair
- Quote
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Common Moor and nearby
Common Moor is about 3 miles north of Liskeard, in Cornwall. Across the PL14 area, we carry out the work at your property. Our technicians cover 644 places in Cornwall, from the larger towns to small villages.
All of PL14 is within our area. If you’re just outside Common Moor, we cover St Cleer (1 mile south-east), Tremar Coombe (1 mile south-east), Darite (1 mile east), Tremar (1 mile south-east) and Trembraze (3 miles south-east). Further out, we also cover Bodmin (11 miles west), Saltash (13 miles south-east), Liskeard (3 miles south), Launceston (11 miles north-east), Addington (3 miles south-east) and Looe (10 miles south).
Around Common Moor
Typical jobs here are in homes near Church of St Clarus and St Cleer Primary Academy, among other places. Common Moor’s nearest station is Liskeard station, about 3.5 miles south. Well-known places in the area include Thorburn Museum & Gallery (2.9 miles south-west). The countryside around Common Moor includes Caradon Hill and Dozmary Pool.
What a repair cannot fix
Some jobs are not right for a repair, including:
- Very wide gaps that need a trim
- A bath or tray that moves, until its support is fixed
- Rotten walls or floors behind the bath
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Shower trays & enclosures
- Wet rooms
- Baths
- Kitchen worktops & sinks
- Basins & vanity units
Work for landlords and builders
Landlords, letting agents and housing providers in Common Moor use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Common problems we fix in Common Moor
Poor ventilation speeds things up: damp hangs around, and mould takes hold.
Keep an eye out for these signs:
- Old sealant that looks dirty
- Black spots in the silicone
- Gaps by the taps
- Damp near the bath
Comparing quotes
- What aftercare is recommended
- The length of the guarantee and what it covers
- How changes to the job are handled
- How your room will be protected
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Store bottles on a shelf
- Ventilate the bathroom well
- Replace the seal when mould sets in
- Open a window after bathing
Use the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.
Mouldy sealant is more than a cosmetic problem, it’s a sign moisture is sitting in the joint. Resealing early keeps water out of the walls and floor.
What affects the price in Common Moor
We don’t charge extra for travel to Common Moor. The price comes down to:
- The size and number of damaged areas
- Any earlier repairs that need removing first
- Access to the area
- The type of damage
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send photos for a quote
It only takes a minute to photograph the damage. Try to send:
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- Something in shot to show the size
- One picture of the entire bath or shower
For a price in Common Moor, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Common questions in Common Moor
Why does my sealant keep splitting?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens once I’ve sent pictures?
We review the pictures and send a fixed quote and the next dates we have.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Can you quote from pictures?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Can you reseal over the old silicone?
No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.
How do I book?
Photos of the damage, a picture of the whole bath or shower and your postcode. After that, we just agree a date.
Places near Common Moor
Also in Common Moor
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
How the visit works
Arrival times are agreed in advance. On site, it takes a couple of hours. The room is left tidy and ready to use once it has cured.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Tell us about parking, stairs or access
- Open a window if you can
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
