Perth and Kinross · Scotland
Bath & shower resealing (mastic) in Tullibardine, Perth and Kinross
Our repair technicians come to Tullibardine for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.
- Missing sealant behind the taps
- Stained silicone
- Silicone smeared on tiles
Do you need bath resealing in Tullibardine?
Black mould is the most common reason people reseal. It grows into the silicone, so cleaning only removes the surface.
Customers normally contact us about:
- Damp near the bath
- Unsealed corners
- Silicone smeared on tiles
- Discoloured, yellow sealant
What to look for in a quote
- How changes to the job are handled
- Who turns up on the day
- If travel is included in the price
- Is the price fixed, and does it include VAT?
How we handle bath resealing in Tullibardine
A fresh seal protects your bathroom. Failed sealant lets water get where it shouldn’t, and resealing puts a stop to that. Our repair technicians work on basins & vanity units, kitchen worktops & sinks and wet rooms, and common reasons people contact us are missing sealant behind the taps and black spots in the silicone.
Big or small, you get the same one-year guarantee.
- Where
- Tullibardine (PH3)
- Region
- Perth and Kinross
- Guarantee
- One year on every repair
- Quotes
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Tullibardine
Other services in Tullibardine
Where we work around Tullibardine
Tullibardine is about 13 miles south-west of Perth, in Perth and Kinross. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover 107 places across Perth and Kinross, from the larger towns to small villages. Our nearest city page is Edinburgh, about 32 miles away.
Postcode districts we cover here: PH3. Neighbouring places we cover include Auchterarder (2 miles south-east), Blackford (3 miles south-west), Aberuthven (4 miles east), Muthill (4 miles north-west) and St David's (4 miles north). Further out, we also cover Perth (13 miles north-east), Crieff (6 miles north-west), Kinross (14 miles south-east), Letham (12 miles north-east), Scone (15 miles north-east) and Tulloch (13 miles north-east).
Near you in Tullibardine
Our clients here include homes close to Community School of Auchterarder, among other places. The nearest railway station is Gleneagles station, about 2.2 miles south of the centre. Further afield, we also cover the area around St Margaret's Hospital (1.3 miles south-east) and Tullibardine Castle (0.8 miles west). Not far away are Pond of Drummond.
What your bath or shower is made of matters
Baths
We fill the bath before sealing, so the joint is at its widest.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Why reseal now?
Putting new silicone over old doesn’t last. It peels within weeks, and mould stays trapped behind it. A proper reseal removes the old first. The price reflects the work involved, not where you live. The full price is agreed before you book.
Why us?
- Work done at your home or business
- One visit for most repairs
- Free fixed quotes from pictures
- Accredited with CHAS, Constructionline and SafeContractor
Read our prices page.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Reseal at the first sign of lifting
- Store bottles on a shelf
- Dry the seal after bathing
- Run the extractor fan during and after showers
Good ventilation is the best protection, and dry the joints after bathing so mould struggles to take hold.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
Tullibardine: your questions answered
Why does my sealant keep splitting?
The bath or tray is probably flexing. If it keeps happening, the support may need fixing.
Do you charge for travel?
We don’t add a call-out fee. The fixed price covers the visit and the work.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
What happens after I send pictures?
We come back with a fixed quote, plus dates. There’s no obligation to book.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can new silicone go over old?
Never over old. The old sealant is cut out and the joint cleaned and dried.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How the visit works
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. Most jobs take around two hours, and you can get on with other things while we are there.
- The surrounding area is protected and the joints masked.
- Old sealant and residue are removed.
- We clean, treat and dry the joint.
- Fresh silicone is applied in a continuous bead.
- We smooth the bead, remove the tape and leave it to cure.
Preparing for the visit
- Open a window if you can
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
Getting a price
Send us a photo of the damage and one of the whole item, and tell us you’re in Tullibardine, and we’ll reply with a fixed quote.
Advice
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What affects the price in Tullibardine
We don’t charge extra for travel to Tullibardine. The price comes down to:
- How many items we do on one visit
- The material and finish
- How much damage there is
- How hard the colour is to match
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Send photos for a quote
Phone photos are fine, there’s no need for anything special. Just make sure we can see:
- A picture taken from further back
- Natural light rather than flash
- What it’s made of, if you know
- Details of any past repairs
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them over. You will get a fixed price, not an estimate.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
