Perth and Kinross · Scotland
Bath chip & crack repair in Tullibardine, Perth and Kinross
Local bath repair for Tullibardine: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- A kit repair that didn’t last
- A chip where the taps sit
Bath repair in Tullibardine, done in place
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Whether it’s an old repair that has yellowed or come loose and a chipped rim or side, we can generally put it right, on whirlpool & spa baths, pressed steel enamel and cast iron enamel alike.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Area
- Tullibardine (PH3)
- Area hub
- Perth and Kinross
- Cover
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a morning or an afternoon, depending on what we find, and we finish by cleaning up and talking you through the result.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Make sure the room can be ventilated
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
Advice
Common problems we fix in Tullibardine
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Keep an eye out for any of the following:
- Rust spots around the plughole
- Chips along the edge of the bath
- Chips under the taps
- Snagging damage from a refit
What your quote should include
- Whether there are any call-out or travel charges
- What the guarantee covers, and for how long
- What prep work is covered
- How to care for the finish
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
About Tullibardine
Tullibardine is about 13 miles south-west of Perth, in Perth and Kinross. We visit homes and businesses in Tullibardine and the surrounding area, so there is no workshop to go to. Tullibardine is one of 107 places in Perth and Kinross where we work. Our nearest city page is Edinburgh, about 32 miles away.
Jobs in PH3 work the same way as everywhere else we cover. We also cover the places around Tullibardine: Auchterarder (2 miles south-east), Blackford (3 miles south-west), Aberuthven (4 miles east), Muthill (4 miles north-west) and St David's (4 miles north). Further out, we also cover Perth (13 miles north-east), Crieff (6 miles north-west), Kinross (14 miles south-east), Letham (12 miles north-east), Scone (15 miles north-east) and Tulloch (13 miles north-east).
Near you in Tullibardine
Our clients here include homes close to Community School of Auchterarder. The closest station to Tullibardine is Gleneagles station, roughly 2.2 miles south of the centre. Well-known places in the area include St Margaret's Hospital (1.3 miles south-east) and Tullibardine Castle (0.8 miles west). Green spaces nearby include Pond of Drummond.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Looking after it afterwards
So the finish stays in good condition for years:
- Cover the bath during DIY or decorating
- Give the bath a quick rinse after use
- Have new chips seen to early
- Check that an acrylic bath does not move when you stand in it
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
What we cannot put right
To be straight with you, there are a few things a repair won’t fix:
- Flexing caused by a failed cradle or loose feet
- Acrylic cracks with no access behind them
- Rust that has eaten right through a steel bath
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Tullibardine. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Tullibardine clients choose us
- Colours mixed by hand to suit your surface
- One visit for most repairs
- Nothing taken out or refitted
- We’ll tell you if it’s not worth repairing
See our pricing and guide to resurfacing and replacement costs.
FAQs for Tullibardine
Is a repair better than a new one?
Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we’ll quote them together.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Do you cover Tullibardine?
We do. Technicians travel to Tullibardine from across the region, and the price is the same as everywhere else.
Are there extra charges for Tullibardine?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
How we price bath repair
Repairs from £95. Each job gets its own fixed quote. This is what makes a difference:
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- How many areas need work
- The material
Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Send pictures for a quote
Most quotes are done from photos alone. To help us price it:
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- Where you are, by postcode
- Any earlier repairs or coatings
Email us photos of the damage and one of the entire item, with your PH3 postcode, and we will reply with a fixed price.
Nearby places to Tullibardine
What else we do in Tullibardine
About our accreditations · Every repair comes with a one-year guarantee.
