Lincolnshire · England

Bath Resealing in Twenty

Bath, shower and sink resealing with new mould-resistant silicone in Twenty, carried out at your home and guaranteed for a year.

  • Discoloured, yellow sealant
  • Leaks at the edges
  • Sealant that’s split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Twenty homes

When a repair isn’t the answer

Some problems need a builder, plumber or fitter rather than us:

  • Hollow or loose tiles
  • Water damage behind the bath that needs a builder
  • Movement in the bath or tray

Send us photos and we will tell you honestly.

What we work on

  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Basins & vanity units
  • Baths
  • Wet rooms

How we handle bath resealing in Twenty

A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, in a neat, continuous bead. We work on baths, wet rooms and kitchen worktops & sinks, and common reasons people contact us are stained silicone and leaks at the edges.

We stand behind the work with a one-year guarantee, so you’re covered after the visit.

Technician in a mask working on a freestanding roll-top bath
Location
Twenty (PE10)
Area hub
Lincolnshire
Guarantee
12 months on all our work
Price
Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026

Twenty questions

Can pets and children be at home?

Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.

Do you cover Twenty?

Yes. We cover the entire UK and come to Twenty. Send photos and we will quote, or call 0345 017 0787.

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

Is my repair covered?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

What happens next?

We come back with a fixed quote. There’s no obligation to book.

Why does my sealant keep going mouldy?

Mould needs moisture. Ventilation and drying keep it clean longer.

How do I book?

Some photos, your postcode and how to reach you. On the day, we only need access to the room.

Should I try a DIY kit first?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

What bath resealing costs

Quotes are free and the price is fixed. What we take into account:

  • Access to the area
  • What the surface is made of
  • Previous DIY repairs that have to come out
  • What kind of damage it is

Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

Send pictures for a quote

We price nearly every job from photos. This is what to send:

  • The material, if you know it
  • A clear, close picture of the problem area
  • Natural light rather than flash
  • A wider photo showing the whole bath or shower

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Is resealing worth it?

Resealing is a small job. Putting off a reseal lets water get behind the bath or tray, and that damage costs much more to fix. Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.

Why us?

  • Accredited with CHAS, Constructionline and SafeContractor
  • One-year guarantee on every repair
  • No need to remove anything
  • A fixed quote before booking

Read our pricing.

Work for landlords and builders

We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.

What we do, step by step

We agree an arrival time beforehand, so you are not left guessing. Once we are there, the work takes a couple of hours in most cases. The room is left tidy.

  1. We cut out and remove all of the old sealant.
  2. The joint is cleaned and any mould treated.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.

Getting ready for the visit

  • Tell us about parking, stairs or access
  • Have somewhere for us to park nearby if possible
  • Move bottles, mats and clutter away from the area

Ask for a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Get a fixed price

Related advice

Common problems we fix in Twenty

Poor ventilation speeds things up: damp hangs around, and mould grows faster.

It’s worth getting a quote if you see:

  • Silicone coming away from the tiles
  • Gaps by the taps
  • Mould you can’t clean out
  • An untidy old seal

Comparing quotes

  • A fixed quote, and whether VAT is included
  • What protection goes down before work starts
  • Who will actually do the work
  • Whether cleaning and preparation are in the price

Choosing a repair company

Keeping it looking good

Looking after the surface is easy, and it makes a real difference:

  • Use the extractor fan
  • Open a window after bathing
  • Replace the seal when mould sets in
  • Give the seal a regular clean

Don’t scrape the sealant with anything sharp, and keep shampoo bottles off the joints.

Black mould in sealant is not just unsightly, it’s a sign moisture is sitting in the joint. Resealing early keeps water out of the walls and floor.

About Twenty

Twenty is about 4 miles east of Bourne, in Lincolnshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Twenty is one of 732 towns and villages in Lincolnshire we cover. Our jobs stretch from Twenty to Birmingham (about 70 miles away).

Our visits in PE10 are booked in the same way as anywhere else. From Station Road, The Spinney and Spalding Road or a nearby road, we can come to you. Nearby, we also work in Tongue End (1 mile south), Guthram Gowt (2 miles north-east), Eastgate (3 miles west), Dyke (3 miles west) and Austerby (3 miles west). We also work in nearby towns such as Spalding (6 miles east), Stamford (11 miles south-west), Holbeach (13 miles east), Market Deeping (6 miles south), Pinchbeck (6 miles north-east) and Paston (12 miles south).

Around Twenty

A little further out are Bourne Castle (3.8 miles west). Open spaces near Twenty include Baston Fen.

Map of Twenty © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.