Argyll and Bute · Scotland

Bath Resealing for Upper Kilchattan homes

Fixed-price bath resealing in Upper Kilchattan and the surrounding area, done in a single visit in most cases.

  • Silicone smeared on tiles
  • Black mould in the sealant
  • Missing sealant behind the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Upper Kilchattan

Bath resealing at your home in Upper Kilchattan

Preparation is everything in a reseal: every bit of old silicone out, mould treated, the joint clean and dry. Then the fresh sealant goes on, in a neat, continuous bead. We are frequently asked to fix water getting behind the bath or tray and missing sealant behind the taps, on baths, basins & vanity units and wet rooms.

Big or small, you get the same one-year guarantee.

Area
Upper Kilchattan (PA61)
County
Argyll and Bute
Guarantee
A year, on every repair
Quote
Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Covering Upper Kilchattan

Upper Kilchattan is in Argyll and Bute. We visit homes and businesses in Upper Kilchattan and nearby villages, so there is no workshop to go to. Upper Kilchattan is one of 118 places in Argyll and Bute where we work. You can also see our page for Glasgow, about 77 miles away.

Postcode districts we cover here: PA61. With the B8086 close by, Upper Kilchattan is simple for us to get to. If you’re just outside Upper Kilchattan, we cover Scalasaig (1 mile south-east), Bunnahabhain (14 miles south), Bunessan (16 miles north), Ardtun (16 miles north) and Port Askaig (17 miles south). Some remote addresses need extra planning, so it’s best to call first.

What’s near Upper Kilchattan

In Upper Kilchattan, that means homes near St Cathan's Chapel and the streets around them. Nearby you will also find The Old Waiting Room (1.3 miles south-east). Open spaces near Upper Kilchattan include Càrnan Eoin and Loch Fada.

Map of Upper Kilchattan © OpenStreetMap contributors

Should I try a DIY kit first?

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Work for landlords and builders

We work for landlords, letting agents and housing providers in Upper Kilchattan as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

When to call us in Upper Kilchattan

Even good sealant eventually discolours, especially in a busy family bathroom. Steam, soap and movement all take their toll.

These are the problems we’re asked about most:

  • Mould you can’t clean out
  • Gaps by the taps
  • Silicone coming away from the tiles
  • Leaks at the edges

Before booking anyone

  • Who turns up on the day
  • Whether there are any call-out or travel charges
  • Is the price fixed, and does it include VAT?
  • How long the guarantee is and what it covers

Choosing a repair company

How to care for the repair

Once the work has cured, treat it gently:

  • Dry the seal after bathing
  • Keep bottles off the joints
  • Reseal at the first sign of lifting
  • Let steam out after showers

Leave the sealant to cure for the time we give you, normally around 24 hours.

Black mould in sealant isn’t just unsightly; it shows moisture is getting in. An early reseal keeps water where it belongs.

Why it’s worth resealing in Upper Kilchattan

A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in Upper Kilchattan

  • A fixed quote before booking
  • One visit for most repairs
  • Everything repaired in place
  • Honest advice, even when it means no job

Read our pricing.

What we can’t put right

We would rather lose a job than do one that won’t last, so these are the limits:

  • Movement in the bath or tray
  • Gaps so wide they need filling or trims before sealing
  • Tiles that move, until they’re refixed

If in doubt, send pictures and we will say what we think before booking.

Materials we repair

  • Baths
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Wet rooms
  • Shower trays & enclosures

Your questions about bath resealing in Upper Kilchattan

Do you work in Upper Kilchattan?

Yes, we do. We send a technician to Upper Kilchattan for every job, and the price is the same as everywhere else.

Do you work for landlords and businesses?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

Is it OK to have pets in the house?

Just keep them out of the work area. We will tell you when the room can be used again.

How do I stop mould in sealant?

Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.

What happens after I send pictures?

We review the photos and send a fixed quote.

Can tenants book a repair?

Of course. Check with your landlord; we can send the quote to them too.

How do I get a price for bath resealing in Upper Kilchattan?

Because every job differs, we price from photos. You will get a fixed figure before booking.

Is there any odour?

Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.

What we do, step by step

Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes around two hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. First we strip out every bit of the old mastic.
  2. The joint is cleaned and any mould treated.
  3. We ensure the joint is completely dry.
  4. Baths are filled with water first, so the joint is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, taps included.

How to prepare

  • Tell us about any previous repairs or coatings
  • Ensure the room can be ventilated
  • Let us know about parking or access

Getting a price

There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Advice

Prices and what affects them

Quotes are free and the price is fixed. What we take into account:

  • What the surface is made of
  • Any earlier repairs that need removing first
  • The size and number of damaged areas
  • How easy the damage is to reach

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

How to get a fixed quote

When you take your photos, a few simple things make all the difference:

  • The material, if you know it
  • Details of any past repairs
  • A picture taken from further back
  • Where you are, by postcode

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.