Wiltshire · England
Bath & shower resealing (mastic) in Wilcot, Wiltshire
Bath resealing in and around Wilcot: photo quotes, tidy work and a year’s guarantee.
- Black mould in the sealant
- An untidy old seal
- Old sealant that looks dirty
About our bath resealing in Wilcot
Resealing is one of the simplest ways to protect your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and resealing puts a stop to that. If you’re dealing with discoloured, yellow sealant and missing sealant behind the taps, we can usually put it right, whatever the material.
Big or small, you get the same one-year guarantee in Wilcot and across Wiltshire.
- Area
- Wilcot (SN9)
- County
- Wiltshire
- Warranty
- A year, on every repair
- Quotes
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Repairs by material
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Baths
We fill the bath before sealing, to open the joint fully.
For landlords and businesses
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Aftercare tips
So the finish stays in good condition for years:
- Open a window after bathing
- Clean the joints with a mild cleaner
- Don’t stand toiletries on the seal
- Reseal when black spots won’t clean off
Use the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
Black mould in sealant is not just unsightly. An early reseal keeps water where it belongs.
Places near Wilcot
Other services in Wilcot
About Wilcot
Wilcot is about 8 miles east of Devizes, in Wiltshire. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. We work in 425 places in Wiltshire, from the larger towns to small villages. Our nearest city page is London, about 74 miles away.
Every address in SN9 is within our area. We also cover the places around Wilcot: Manningford Abbots (1 mile south), Woodborough (2 miles south-west), Alton Priors (2 miles west), Alton Barnes (2 miles west) and Manningford Bohune (2 miles south). Within a short drive, we also cover Calne (11 miles north-west), Devizes (8 miles west), Melksham (14 miles west), Amesbury (13 miles south), Marlborough (6 miles north-east) and Bulford (11 miles south).
Local landmarks in Wilcot
Our clients here include homes close to Pewsey Vale School and Church of the Holy Cross and the streets around them. The closest station to Wilcot is Pewsey station, about 1.4 miles south-east. Further afield, we also cover the area around Pewsey Heritage Centre (1.7 miles south-east). Open spaces near Wilcot include Knap Hill.
Prices and what affects them
Prices are worked out job by job. The main factors are:
- The material
- The type of damage
- How many items we do on one visit
- Where the damage is and how we get to it
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A wider photo showing the whole bath or shower
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
If you are in Wilcot and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
What happens on the day
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take about two hours for a bath. We tidy up before we leave and tell you when it’s ready to use.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
Getting a price
Email us pictures of the damage and one of the entire item, with your SN9 postcode, and we’ll come back with a fixed quote.
Advice
FAQs for Wilcot
Why does the silicone keep cracking?
The bath or tray is probably flexing. If it keeps happening, the support may need fixing.
Do you cover Wilcot?
Yes. We work across the UK and travel to Wilcot. Send pictures and we will quote, or call 0345 017 0787.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
What happens once I’ve sent pictures?
We come back with a fixed price, generally with dates to choose from. There is no obligation to book.
What do you need from me?
Use the quote form or ring 0345 017 0787.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
When can I use the bath after resealing?
You’ll get the curing time from us, normally around a day.
When we would advise against a repair
It helps to know what we can’t do too:
- Tiles that move, until they’re refixed
- A bath or tray that moves, until its support is fixed
- Water damage behind the bath that needs a builder
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Wilcot
- Baths
- Basins & vanity units
- Kitchen worktops & sinks
- Wet rooms
- Shower trays & enclosures
Do you need bath resealing in Wilcot?
Black mould is the most common reason people reseal. It grows into the silicone, so cleaning can’t get it all out.
These are the problems we’re asked about most:
- Black mould in the sealant
- Gaps in the seal
- Discoloured, yellow sealant
- An untidy old seal
What to look for in a quote
- Whether a trained technician does the job
- What the guarantee covers, and for how long
- If travel is included in the price
- How to look after the finish
About our accreditations · Every repair comes with a one-year guarantee.
