Shropshire · England
Bath & shower resealing (mastic) in Wyke, Shropshire
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Wyke and across Shropshire. Send photos for a free, fixed quote.
- Discoloured, yellow sealant
- Missing sealant behind the taps
- Mould you can’t clean out
Bath resealing at your home in Wyke
Preparation is everything in a reseal: every bit of old silicone out, mould treated, the joint clean and dry. Only then does the new sealant go on, as one neat, continuous bead. If you’re dealing with gaps by the taps and old sealant that looks dirty, we can typically put it right, whatever the material.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Area
- Wyke (TF13, TF12)
- Area hub
- Shropshire
- Warranty
- One year on every repair
- Quote
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Is resealing worth it?
Sealing over old silicone is a false economy. It soon peels, and traps mould underneath. We remove the old sealant completely. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Everything repaired in place
- Usually one visit, start to finish
- We leave the room as we found it
- Same prices wherever you are
See our prices page.
What a repair cannot fix
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Movement in the bath or tray
- Very wide gaps that need a trim
- Water damage behind the bath that needs a builder
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Baths
- Basins & vanity units
- Kitchen worktops & sinks
- Shower trays & enclosures
- Wet rooms
Also in Wyke
FAQs for Wyke
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.
Do you cover Wyke?
Yes. We work across the UK and travel to Wyke and the rest of Shropshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Why does my sealant keep going mouldy?
Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.
How long will it take?
Most reseals take about two hours. Leave it to cure before use.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
How we price bath resealing
You won’t pay by the hour. The price is based on:
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- The colour and finish to match
- Doing more than one item at once
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A close-up of the damage, in focus
- A picture taken from further back
- Details of any past repairs
- A coin or ruler next to the damage for scale
Email us pictures of the damage and one of the entire item, with your TF13 postcode, and we’ll come back with a fixed quote.
Landlords, agents and businesses in Wyke
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Our work in Wyke
Wyke is about 3 miles south-west of Madeley, in Shropshire. Jobs in Wyke are booked in like any other job: a fixed price from your photos, then a visit to do the work. Wyke is one of 433 places in Shropshire where we work. You can also see our page for Birmingham, about 28 miles away.
All of TF13 and TF12 is covered. We also cover the places around Wyke: Posenhall (1 mile east), Farley (1 mile west), Buildwas (2 miles north), Homer (2 miles west) and Leighton (3 miles north-west). Further out, we also cover Shrewsbury (11 miles north-west), Madeley (3 miles north-east), Bridgnorth (7 miles south-east), Coleham (11 miles north-west), Kingsland (12 miles north-west) and Belle Vue (11 miles north-west).
What’s near Wyke
Typical jobs here are in homes near William Brookes School and the streets around them. Other landmarks nearby include Broseley Pipeworks (1.5 miles east). Not far away are The Ercall.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Different materials, different repairs
Shower trays
Trays are sealed with weight on them, for the same reason.
Baths
Baths are resealed with water in them, to open the joint fully.
What we’re called out for in Wyke
In time, even good sealant discolours. Steam, soap and movement all take their toll.
You may need us if you’ve spotted any of these:
- Mould you cannot clean out
- Gaps by the taps
- Gaps in the seal
- Damp near the bath
Comparing quotes
- Whether the price is fixed and includes VAT
- How to care for the finish
- How long it needs to cure
- Whether they match the colour on site
What happens on the day
Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. Allow around two hours.
- First we strip out every bit of the old mastic.
- We clean the joint and treat any mould.
- We ensure the joint is completely dry.
- We fill a bath with water before sealing so the gap is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
How to prepare
- Move bottles, mats and clutter away from the area
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
Get a quote
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and you are under no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
