Somerset · England
Non-slip bath & shower coating in Aller, Somerset
We travel to Aller for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
About our non-slip bath coating in Aller
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. If you’re dealing with bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet, we can help, on resurfaced baths, acrylic baths and enamelled baths alike.
A one-year guarantee comes with the work, just as it does everywhere we cover. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Area
- Aller (TA10)
- Area hub
- Somerset
- Warranty
- 12 months on all our work
- Quote
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
More services for Aller
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Questions from Aller
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens next?
We come back with a fixed price, generally with dates to choose from. There is no obligation to book.
How do I get a price for non-slip bath coating in Aller?
Because every job differs, we price from photos. You will get a fixed figure before booking.
Do you cover Aller?
Yes. We work across the UK and come to Aller and the rest of Somerset. Send photos and we will quote, or call 0345 017 0787.
Will I see the coating?
Very little: it shows as a matt area where you stand.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
What we do, step by step
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take a few hours, including clearing up.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Have a window or extractor fan available
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
Get a quote
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
Prices and what affects them
We price every job individually, from your pictures. The main factors are:
- How many areas need work
- The material
- How hard the colour is to match
- Where the damage is and how we get to it
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before you book.
Send pictures for a quote
Phone pictures are fine, there’s no need for anything special. Just make sure we can see:
- One picture of the whole bath or shower tray
- Natural light rather than flash
- Details of any past repairs
- A close-up of the damage, in focus
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Where we work around Aller
Aller is about 8 miles south-east of Bridgwater, in Somerset. Jobs in Aller are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Our technicians cover all 640 towns and villages across Somerset, from the larger towns to small villages.
Our technicians cover all of the TA10 postcode area. Jobs here include addresses on High Street, Church View Close and Wood Lane and the roads around them. If you are just outside Aller, we cover Combe (1 mile south-east), Beer (1 mile north), Wearne (2 miles east), Othery (2 miles north-west) and Langport (2 miles south-east). Within a short drive, we also cover Taunton (11 miles west), Bridgwater (8 miles north-west), Yeovil (12 miles south-east), Chard (14 miles south), Burnham-on-Sea (14 miles north-west) and Wells (14 miles north-east).
Around Aller
Around Aller, we work in homes near Huish Episcopi Academy, Church of Saint Andrew and The Old Pound Inn and the streets around them. Nearby you’ll also find Willows and Wetlands Visitor Centre (3.6 miles west). The countryside around Aller includes West Sedgemoor RSPB reserve and Burrow Mump.
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Aller
- Rooms protected and left tidy
- No extra charge for your area
- Honest advice, even when it means no job
- Technicians who travel to you, UK-wide
Read our full price list.
Honest limits
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Enamelled baths
- Shower trays
- Resurfaced baths
- Wet room floors (ask us)
- Acrylic baths
Common problems we fix in Aller
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Most people contact us when they notice one of these:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Comparing quotes
- Who will actually do the work
- How long it needs to cure
- A fixed price, and whether VAT is included
- Whether they match the colour on site
About our accreditations · Every repair comes with a one-year guarantee.
