Somerset · England

Non-slip bath & shower coating in Beer, Somerset

Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Beer. Free, fixed quotes from your photos.

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Beer?

About our non-slip bath coating in Beer

It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Our technicians work on acrylic baths, wet room floors (ask us) and shower trays, and the jobs we see most are bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet.

You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Area
Beer (TA10)
County
Somerset
Warranty
12 months on all our work
Quotes
Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Repair or replace in Beer?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why Beer clients choose us

  • One price list for the whole UK
  • Honest advice, even when it means no job
  • Technicians who travel to you, UK-wide
  • No need to remove anything

Take a look at our pricing.

Prices and what affects them

We don’t charge extra for travel to Beer. The price depends on:

  • How many areas need work
  • What kind of damage it is
  • Whether old repairs or coatings need taking off
  • Where the damage is and how we get to it

The price reflects the work involved, not your postcode. You’ll see the full price before booking, with no extras added later.

How to get a fixed quote

A couple of clear pictures is all it takes. It helps if you send:

  • What it’s made of, if you know
  • The postcode, so we can plan the visit
  • Natural light rather than flash
  • Whether it’s been repaired or coated before

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Signs you need non-slip bath coating in Beer

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

You may need us if you’ve spotted:

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet

Comparing quotes

  • What happens if they find more damage
  • How the colour is matched
  • Who turns up on the day
  • Whether cleaning and preparation are in the price

Choosing a repair company

Honest limits

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Beer

  • Shower trays
  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths
  • Wet room floors (ask us)

How it works

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow a morning or an afternoon from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Keep pets and children out of the room while we work
  • Point us to the nearest place to park

How to get a price

Email us a picture of the damage and one of the whole item, with your TA10 postcode, and we will come back with a fixed quote.

Get a fixed price

Advice

Landlord and trade work in Beer

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

Covering Beer

Beer is about 7 miles south-east of Bridgwater, in Somerset. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Beer is one of 640 towns and villages in Somerset where we work.

Our visits in TA10 are booked in the same way as anywhere else. If you are just outside Beer, we cover High Ham (1 mile east), Aller (1 mile south), Othery (1 mile west), Low Ham (2 miles south-east) and Combe (2 miles south). We also work in nearby towns such as Taunton (12 miles west), Bridgwater (7 miles north-west), Yeovil (13 miles south-east), Chard (15 miles south), Burnham-on-Sea (13 miles north-west) and Wells (12 miles north-east).

Around Beer

Our customers here include homes close to St Andrew's Church. Green spaces nearby include Burrow Mump and West Sedgemoor RSPB reserve.

Map of Beer © OpenStreetMap contributors

Common questions in Beer

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Do you hold any accreditations?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do you work for landlords and businesses?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Which areas do you work in?

Across the UK, and that includes Beer. Our prices are the same everywhere.

Is my repair covered?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.