Argyll and Bute · Scotland
Non-Slip Bath Coating in Askomill
Clear non-slip coatings for baths and shower trays for homes and businesses in Askomill and across Argyll and Bute. Free, fixed quotes from your pictures.
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten

How we handle non-slip bath coating in Askomill
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Typical jobs include bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, on shower trays, enamelled baths and resurfaced baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Area
- Askomill (PA28)
- Area hub
- Argyll and Bute
- Cover
- 12 months on all our work
- Quote
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026

How we price non-slip bath coating
We give every job a fixed price from photos. This is what makes a difference:
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- The material
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before you book.
Quotes from your photos
Two or three clear pictures are typically enough. It helps if you send:
- Details of any past repairs
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- One sharp close-up of the damage
Email us a picture of the damage and a wider shot of the whole item, and tell us you are in Askomill, and we’ll reply with a fixed quote.
Towns and villages near Askomill
What else we do in Askomill
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a morning or an afternoon. If we find something your photos didn’t show, we will explain it before carrying on.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
- Keep pets and children out of the room while we work
Get a quote
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Our work in Askomill
Askomill is about 30 miles north-east of Ballycastle, in Argyll and Bute. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Askomill is one of 118 towns and villages in Argyll and Bute where we work. Our jobs stretch from Askomill to Glasgow (about 59 miles away).
Every address in PA28 is covered. From High Street, Lochruan Road and John Street or a nearby road, we can come to you. We also travel to Campbeltown (1 mile south-west), Kilkerran (1 mile south), Drumlemble (4 miles west), West Darlochan (4 miles north-west) and Southend (8 miles south). For island and remote addresses, ring us first and we will plan the trip.
What’s near Askomill
Our customers here include homes close to Free Church of Scotland, 2 Bolgam Street pub and Campbeltown Library and Museum and the streets around them. Further afield, we also cover the area around Campbeltown Hospital (0.6 miles south-west) and Campbeltown Library and Museum (0.5 miles south-west). For a walk, there’s Beinn Ghuilean and Black Loch.
What we can’t put right
To be straight with you, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly before you book.
What we work on
- Enamelled baths
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
- Shower trays
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
FAQs for Askomill
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Do you cover Askomill?
Yes. We work across the UK and come to Askomill and the rest of Argyll and Bute. Send us pictures for a fixed quote, or call 0345 017 0787.
What happens once I’ve sent photos?
We come back with a fixed quote. You’re under no obligation.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Is a repair better than a new one?
Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Signs you need non-slip bath coating in Askomill
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Look out for any of the following:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Worn-out textured areas
Comparing quotes
- How the colour is matched
- How the room is protected while they work
- Whether the price is fixed and includes VAT
- What happens if the damage is worse than the pictures show
Repair or replace in Askomill?
The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Nothing taken out or refitted
- Generally one visit, start to finish
- Repair technicians who travel to you, UK-wide
See our pricing.
About our accreditations · Every repair comes with a one-year guarantee.

