Somerset · England
Bath chip & crack repair in Beer, Somerset
Bath repair in Beer without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- Rust by the waste and overflow
- A failed DIY repair that’s discoloured or lifting
What we cannot put right
In fairness, there are a few things a repair will not fix:
- Metal that has corroded all the way through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we can’t reach from underneath
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
Bath repair in Beer without replacing anything
You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. We’re frequently asked to fix impact holes in acrylic and a kit repair that didn’t last, on pressed steel enamel, acrylic and whirlpool & spa baths.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.
- Location
- Beer (TA10)
- County
- Somerset
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- How hard the colour is to match
- The material and finish
- Whether it’s a chip, crack, burn or wear
- How much damage there is
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
The quickest way to a price is to send two or three photos using our quote form or ring us. We will say right away whether it can be repaired.
What else we do in Beer
How to look after the repair
Looking after the surface is easy:
- Rinse it down after each bath
- Ensure an acrylic bath is firm underfoot
- Store metal items away from the bath
- Fix dripping taps early to stop staining and limescale
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
Repairing versus replacing in Beer
People frequently assume a cracked or chipped bath has to come out. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- We come to you, anywhere in the UK
- A fixed quote before you book
- Honest advice, even when it means no job
- No extra charge for your area
See our pricing or bath cost comparison.
When to call us in Beer
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Most people contact us when they notice something like this:
- A hole punched through by something heavy
- Chips caused by builders
- Damage beneath the taps
- Chips on the rim or sides
Comparing quotes
- Whether there are any call-out or travel charges
- Aftercare advice
- Who turns up on the day
- How the room is protected while they work
What we do, step by step
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a morning or an afternoon, and we finish with a tidy-up and a look at the finished work together.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Ensure the room can be ventilated
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
Getting a price
If you’re in Beer and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
Common questions in Beer
When can I have a bath again?
Most baths can be used the following day. We’ll tell you the exact curing time when we finish.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Landlord and trade work in Beer
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Housing associations and facilities teams use us for planned and reactive repairs in Somerset and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Beer and nearby
Beer is about 7 miles south-east of Bridgwater, in Somerset. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Our technicians cover all 640 towns and villages in Somerset.
Jobs in TA10 work the same way as everywhere else we cover. If you are just outside Beer, we cover High Ham (1 mile east), Aller (1 mile south), Othery (1 mile west), Low Ham (2 miles south-east) and Combe (2 miles south). Larger places within reach include Taunton (12 miles west), Bridgwater (7 miles north-west), Yeovil (13 miles south-east), Chard (15 miles south), Burnham-on-Sea (13 miles north-west) and Wells (12 miles north-east).
Around Beer
We visit homes around St Andrew's Church. Not far away are Burrow Mump and West Sedgemoor RSPB reserve.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
About our accreditations · Every repair comes with a one-year guarantee.
