Somerset · England
Non-slip bath & shower coating in Bilbrook, Somerset
Non-slip bath coating in Bilbrook without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
How it works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a morning or an afternoon, and the room is left clean and tidy.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
- Make sure the room can be ventilated
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Non-slip bath coating in Bilbrook without replacing anything
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. We regularly repair resurfaced baths, wet room floors (ask us) and enamelled baths, and people most frequently call us about resurfaced baths that are now too smooth and worn-out textured areas.
Every job is backed for twelve months in Bilbrook and everywhere else. We return to put right any problem with the work. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Area
- Bilbrook (TA24)
- Area hub
- Somerset
- Warranty
- A year, on every repair
- Quote
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
We price every job individually. What matters most is:
- What kind of damage it is
- What the surface is made of
- Unusual colours or finishes
- Access to the area
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
How to get a fixed price
Before you send photos, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- A picture taken from further back
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed price.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
We work for landlords, letting agents and housing providers in Bilbrook as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Why repair rather than replace?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- We will tell you if it’s not worth repairing
- Nothing taken out or refitted
- Fixed prices from your pictures
- No extra charge for your area
Take a look at our prices page.
Also near Bilbrook
Also in Bilbrook
When we would advise against a repair
Not everything can be repaired, and we would rather say so up front. Repairs will not solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Bilbrook
- Wet room floors (ask us)
- Acrylic baths
- Shower trays
- Enamelled baths
- Resurfaced baths
Bilbrook and nearby
Bilbrook is about 5 miles south-east of Minehead, in Somerset. Our technicians come to clients in Bilbrook and nearby villages, so there’s no workshop to go to. Bilbrook is one of 640 towns and villages in Somerset we cover.
Our visits in TA24 work the same way as everywhere else we cover. Nearby, we also work in Old Cleeve (1 mile north-east), Washford (1 mile east), Torre (1 mile south-east), Roadwater (1 mile south) and Chapel Cleeve (1 mile north). Further out, we also cover Minehead (5 miles north-west), Wellington (14 miles south-east), Comeytrowe (15 miles south-east), Watchet (3 miles north-east), Wiveliscombe (9 miles south) and Williton (3 miles east).
Local landmarks in Bilbrook
Locally, our jobs take us to homes close to St Andrew's Church, The Washford Inn and Old Cleeve CofE School. A little further out are Somerset And Dorset Railway Trust Museum (0.7 miles east) and Dunster Castle (3 miles north-west). For a walk, there’s Castle Hill.
Your questions about non-slip bath coating in Bilbrook
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
Will I see the coating?
Very little: the treated area looks slightly matt.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Do the materials smell?
There may be a mild smell during the work.
Can you repair several things at once?
Of course, and it generally saves money. Just add the extra items to your pictures and we will quote them together.
Do you work in Bilbrook?
We do. We send a technician to Bilbrook for every job, and the price is the same as everywhere else.
Common problems we fix in Bilbrook
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Signs it’s time to call us include:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Questions to ask before you book
- Whether the price is fixed and includes VAT
- How the colour is matched
- What protection goes down before work starts
- How long the guarantee is and what it covers
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
