Wolverhampton · England
Non-slip bath & shower coating in Bilston, Wolverhampton
Clear non-slip coatings for baths and shower trays at your home in Bilston, with a one-year guarantee on every repair.
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
Signs you need non-slip bath coating in Bilston
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
The most common problems we are called about are:
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Resurfaced baths that are now too smooth
What your quote should include
- How your room will be protected
- What prep work is covered
- How changes to the job are handled
- If travel is included in the price
About our non-slip bath coating in Bilston
The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Whether it’s safety for older or less mobile people and bath mats that harbour mould or get forgotten, we can help, on enamelled baths, shower trays and resurfaced baths alike.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Bilston (WV14, WV2, WS10, WV1)
- Area hub
- Wolverhampton
- Warranty
- A year, on every repair
- Price
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Bilston
More services for Bilston
How we price non-slip bath coating
We charge the same across the UK, including Bilston. What changes the price is:
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- What kind of damage it is
- Whether we combine several jobs
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Send pictures for a quote
Before you send pictures, a few simple things make all the difference:
- The material, if you know it
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
- One sharp close-up of the damage
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job without visiting.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Bilston
- Honest advice, even when it means no job
- We come to you, anywhere in the UK
- No extra charge for your area
- No need to remove anything
Take a look at our full price list.
Landlord and trade work in Bilston
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
What happens on the day
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, usually overnight.
How to prepare
- Let the surface dry out before the visit
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
Get a quote
If you are in Bilston and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Shower trays
- Wet room floors (ask us)
- Enamelled baths
- Resurfaced baths
- Acrylic baths
Bilston: your questions answered
Will I see the coating?
Only slightly: it shows as a matt area where you stand.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Do you work in Bilston?
We do. Repair technicians travel to Bilston from across the region, with no extra charge for travel.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
About Bilston
Bilston is about 3 miles south-east of Wolverhampton, in Wolverhampton. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. Bilston is one of 96 places in Wolverhampton we cover. We work right across the region, from Bilston to Birmingham (10 miles away).
Here we cover the WV14, WV2, WS10 and WV1 postcode area. Jobs here include addresses on Station Road, Market Way and High Street and the roads around them. Main roads around Bilston include the A41 and A463, so getting to you is simple. We also cover the places around Bilston: The Lunt (1 mile north-east), Moxley (1 mile south-east), Bradley (1 mile south), Portobello (1 mile north) and Woods Bank (1 mile east). Further out, we also cover Wolverhampton (3 miles north-west), New Invention (3 miles north-east), Gornal (4 miles south-west), Perton (6 miles west), Short Heath (3 miles north-east) and Springfield (3 miles north-west). Being one of Wolverhampton’s larger places, Bilston is somewhere we visit frequently.
Landmarks near Bilston
Our customers here include homes close to Bilston School of Art, Ormiston SWB Academy and Church of St Leonard. You’ll also find East Park (1.5 miles north-west), White Rose Public House (less than half a mile north-west) and Holy Trinity Catholic Primary School (under half a mile north-east). For rail, the closest station is Willenhall station, about 1.4 miles north-east. Well-known places in the area include Royal Hospital (2.3 miles north-west) and Bilston Craft Gallery (under half a mile north). Green spaces nearby include Peascroft Wood and Beacon Hill.
About our accreditations · Every repair comes with a one-year guarantee.
