Perth and Kinross · Scotland

Non-Slip Bath Coating in Birnam

Non-slip bath coating in and around Birnam: photo quotes, tidy work and a year’s guarantee.

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Birnam

Non-slip bath coating in Birnam, done in place

It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Our repair technicians work on wet room floors (ask us), acrylic baths and resurfaced baths, and people most often call us about worn-out textured areas and bath mats that harbour mould or get forgotten.

We stand behind the work with a one-year guarantee. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Where
Birnam (PH8)
Region
Perth and Kinross
Guarantee
One year on every repair
Quotes
Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

DIY repairs versus a professional job

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

For landlords and businesses

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

Birnam: your questions answered

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

How do I book?

Just photos, your postcode and a contact number. On the day, we only need access to the room.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

Is repairing better than replacing?

Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

How much does non-slip bath coating cost in Birnam?

The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.

Do you work in Birnam?

Yes. We work across the UK and come to Birnam and the rest of Perth and Kinross. Send us pictures for a fixed quote, or call 0345 017 0787.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Why repair rather than replace?

Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking.

What you get with us

  • Work done at your home or business
  • Accredited with CHAS, Constructionline and SafeContractor
  • We leave the room as we found it
  • One price list for the whole UK

Read our full price list.

Birnam and the surrounding area

Birnam is about 9 miles west of Blairgowrie and Rattray, in Perth and Kinross. Across the PH8 area, we come to you. Birnam is one of 107 places in Perth and Kinross where we work. Our nearest city page is Edinburgh, about 45 miles away.

We work across the PH8 postcode area and the streets around it. Jobs here include addresses on Station Road, Perth Road and Gladstone Terrace and the roads around them. We also cover the places around Birnam: Little Dunkeld (1 mile north-west), Dunkeld (1 mile north-west), Inchmagrannachan (3 miles north-west), Middleton (3 miles east) and Caputh (3 miles east). We also work in nearby towns such as Perth (12 miles south-east), Blairgowrie and Rattray (9 miles east), Letham (11 miles south), Scone (11 miles south-east), Pitlochry (12 miles north-west) and Tulloch (11 miles south).

Around Birnam

Typical jobs here are in homes near Atholl Arms Hotel, Birnam and The Hermitage, among other places. Birnam has its own railway station: Dunkeld & Birnam station. Nearby you’ll also find Murthly Castle (2.6 miles south-east) and Scottish Horse Regimental Museum (0.8 miles north-west). Open spaces near Birnam include Birnam Hill and Loch of the Lowes.

Map of Birnam © OpenStreetMap contributors

When to call us in Birnam

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

If you can see any of these, send us a picture:

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

Before booking anyone

  • How the room is protected while they work
  • Whether they match the colour on site
  • When it can be used again
  • How to care for the finish

10 questions to ask before booking

Prices and what affects them

Prices are worked out job by job, from your photos. The main factors are:

  • Unusual colours or finishes
  • Previous DIY repairs that have to come out
  • The material
  • What kind of damage it is

There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from pictures

Good pictures mean an accurate price. Here’s what helps:

  • A coin or ruler next to the damage for scale
  • Your postcode, so we can check dates
  • Natural light rather than flash
  • The material, if you know it

There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.

What happens on the day

Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take a few hours, and you can get on with other things while we’re there.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Point us to the nearest place to park
  • Open a window if you can
  • Keep pets and children out of the room while we work

How to get a price

We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Get a free quote

Read more

When a repair isn’t the answer

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Birnam

  • Shower trays
  • Wet room floors (ask us)
  • Resurfaced baths
  • Enamelled baths
  • Acrylic baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.