Perth and Kinross · Scotland
Non-Slip Bath Coating for Gellyburn homes
Non-slip bath coating for Gellyburn, without a refit. Send us pictures for a fixed price, then we come to you.
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
Non-slip bath coating in Gellyburn without replacing anything
It’s popular with older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Typical jobs include resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, across resurfaced baths, shower trays and enamelled baths.
We stand behind the work with a one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Location
- Gellyburn (PH1)
- Region
- Perth and Kinross
- Cover
- One year on every repair
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Gellyburn
Gellyburn is about 6 miles south-west of Blairgowrie and Rattray, in Perth and Kinross. Whether you’re in the middle of Gellyburn or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We work in all 107 towns and villages across Perth and Kinross. Our nearest city page is Edinburgh, about 42 miles away.
Our visits in PH1 work the same way as everywhere else we cover. Nearby, we also work in Murthly (1 mile south-east), Caputh (1 mile north-west), Middleton (1 mile north-west), Spittalfield (1 mile north-east) and Bankfoot (3 miles south-west). We also work in nearby towns such as Perth (9 miles south), Blairgowrie and Rattray (6 miles north-east), Letham (9 miles south), Scone (8 miles south), Pitlochry (15 miles north-west) and Tulloch (8 miles south).
Around Gellyburn
Our customers here include homes close to Caputh Parish Church, among other places. The nearest railway station is Dunkeld & Birnam station, roughly 4.3 miles west. A little further out are Blairgowrie Community Hospital (5.9 miles north-east) and Murthly Castle (1.6 miles west). Green spaces nearby include Lily Loch and Birnam Hill.
When a repair isn’t the answer
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly.
Surfaces we repair
- Acrylic baths
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
How we price non-slip bath coating
Each job gets its own fixed quote. These are the things that affect it:
- What the surface is made of
- How easy the damage is to reach
- The size and number of damaged areas
- How many items we do on one visit
We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
When you take your photos, these tips help us give you a firm price:
- Your postcode, so we can check dates
- What it’s made of, if you know
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Work for landlords and builders
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We work for landlords, letting agents and housing providers in Gellyburn as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Your questions about non-slip bath coating in Gellyburn
Is there a guarantee?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before.
How do I book?
Send pictures through the quote form or call 0345 017 0787.
Can you price it without visiting?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Gellyburn.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Repair or replace: which is better?
The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Our prices are the same across the UK, with no extra for Gellyburn. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Gellyburn
- Generally one visit, start to finish
- CHAS and Constructionline accredited
- One price list for the whole UK
- Work done at your home or business
Read our full price list.
Do you need non-slip bath coating in Gellyburn?
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Get in touch if you’ve noticed:
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
Comparing quotes
- What protection goes down before work starts
- Aftercare advice
- How long it needs to cure
- What the guarantee covers, and for how long
How it works
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for a morning or an afternoon. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- We leave it to cure, usually overnight.
Preparing for the visit
- Point us to the nearest place to park
- Let the surface dry out before the visit
- Let us know if it has been repaired before
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Related advice
Also near Gellyburn
What else we do in Gellyburn
About our accreditations · Every repair comes with a one-year guarantee.
