York · England

Non-Slip Bath Coating for Bolton Percy homes

Non-slip bath coating for Bolton Percy, without a refit. Get a fixed price from your photos, then we come to you.

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Bolton Percy

Non-slip bath coating in Bolton Percy, done in place

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. If you are dealing with worn-out textured areas and bath mats that harbour mould or get forgotten, we can help, on shower trays, acrylic baths and enamelled baths alike.

Big or small, you get the same one-year guarantee. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Area
Bolton Percy (YO23)
Region
York
Guarantee
One year on every repair
Quote
Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

How we price non-slip bath coating

There’s no area surcharge for Bolton Percy. The price reflects:

  • Doing more than one item at once
  • How easy the damage is to reach
  • The colour and finish to match
  • What the surface is made of

The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.

Getting a price from photos

Photographing the damage takes a minute. Try to send:

  • What it’s made of, if you know
  • Natural light rather than flash
  • Your postcode, so we can check dates
  • Any earlier repairs or coatings

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Landlords, agents and businesses in Bolton Percy

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.

For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.

Should you replace it?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Why us?

  • No need to remove anything
  • Most jobs done in one visit
  • Work done at your home or business
  • Straight answers about what a repair can do

Read our prices page.

Questions from Bolton Percy

Do you work in Bolton Percy?

Yes, we do. Repair technicians travel to Bolton Percy from across the region, and the price is the same as everywhere else.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

What information do you need?

Just photos, your postcode and a contact number. On the day, we only need access to the room.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Can I add another job to the visit?

Of course, and it normally saves money. Send pictures of everything together and we will quote them together.

Is it OK to have pets in the house?

Just keep them out of the work area. We will let you know when it’s safe to use again.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

About Bolton Percy

Bolton Percy is about 8 miles north-west of Selby, in York. Across the YO23 area, we come to you. Bolton Percy is one of 79 towns and villages in York where we work. You can also see our page for Leeds, about 15 miles away.

Jobs in YO23 work the same way as everywhere else we cover. Whether you live on Main Street, Old Road and Low Farm Road or a nearby road, a technician can come to you. Neighbouring places we cover include Ozendyke (1 mile south), Appleton Roebuck (1 mile north-east), Ryther (2 miles south-east), Acaster Selby (2 miles east) and Cawood (3 miles south-east). Within a short drive, we also cover York (8 miles north-east), Clementhorpe (7 miles north-east), Bishophill (8 miles north-east), Hungate (8 miles north-east), Clifton (8 miles north-east) and Tang Hall (9 miles north-east).

Near you in Bolton Percy

Typical jobs here are in homes near The Crown Inn and Church of All Saints, among other places. For rail, the closest station is Ulleskelf station, about 1.3 miles south-west. Further afield, we also cover the area around Bishopthorpe Rural District (2.1 miles east) and The Ark Museum (3.2 miles north-west).

Map of Bolton Percy © OpenStreetMap contributors

Common problems we fix in Bolton Percy

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

The things customers typically mention when they call are:

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet

What your quote should include

  • Who will actually do the work
  • How to look after the finish
  • How the colour is matched
  • What happens if the damage is worse than the pictures show

Our hiring checklist

What we can’t put right

A repair isn’t always the answer, and we would rather say so up front. We can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer before you book.

What we work on

  • Acrylic baths
  • Enamelled baths
  • Resurfaced baths
  • Shower trays
  • Wet room floors (ask us)

What happens on the day

Here’s how a visit generally runs: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow a morning or an afternoon. Before leaving, we tell you how long to leave it and how to look after it.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, usually overnight.

Getting ready for the visit

  • Mention any parking restrictions or tricky access
  • Make sure the area is dry
  • Have a window or extractor fan available

Get a quote

A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Send pictures for a quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.