Newport · Wales
Non-slip bath & shower coating in Bulmore, Newport
Clear non-slip coatings for baths and shower trays at your home in Bulmore, with a one-year guarantee on every repair.
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Non-slip bath coating in Bulmore, done in place
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We’re often asked to fix worn-out textured areas and a bath or tray that is slippery when wet, in enamelled baths, wet room floors (ask us) and resurfaced baths.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Bulmore (NP18, NP19)
- Region
- Newport
- Cover
- 12 months on all our work
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair can’t fix
A repair is not always the answer, and we will tell you before we start. Repairs won’t solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly.
Materials we repair
- Acrylic baths
- Shower trays
- Enamelled baths
- Wet room floors (ask us)
- Resurfaced baths
Nearby places to Bulmore
More services for Bulmore
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Where we work around Bulmore
Bulmore is about 1 mile south-east of Caerleon, in Newport. Anywhere in NP18, we come to you. Bulmore is one of 69 towns and villages in Newport we cover. Our jobs stretch from Bulmore to Birmingham (75 miles away).
Every address in NP18 and NP19 is covered. You will find streets such as New Road, Isca Road and Castle Lane. If you’re just outside Bulmore, we cover The Village (1 mile south-west), Caerleon (1 mile north-west), Langstone (2 miles east), Ponthir (2 miles north-west) and Brynglas (2 miles west). Within a short drive, we also cover Stow Hill (3 miles south-west), Gold Tops (3 miles south-west), Pillgwenlly (3 miles south-west), Clytha Park (3 miles south-west), Stow Park (3 miles south-west) and Rogerstone (5 miles west).
Around Bulmore
Around Bulmore, we work in homes near Church of the Holy Spirit, Caerleon Comprehensive School and Charles Williams Church in Wales Primary School. For rail, the closest station is Newport (South Wales) station, roughly 2.6 miles south-west of the centre. Further afield, we also cover the area around Caerleon Roman Fortress and Baths (0.5 miles north-west) and St Cadoc's Hospital (0.9 miles north-west). The countryside around Bulmore includes Chepstow Hill and Somerton.
What non-slip bath coating costs
Prices are worked out job by job, from your pictures. The main factors are:
- The material
- What kind of damage it is
- Previous DIY repairs that have to come out
- How much damage there is
The price reflects the work involved, not where you live. The full price is agreed before booking.
Getting a price from pictures
Photographing the damage takes a minute. Try to send:
- Good light, ideally daylight, without flash glare
- The material, if you know it
- The postcode, so we can plan the visit
- One sharp close-up of the damage
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
What we are called out for in Bulmore
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
It’s worth getting a quote if you see:
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Safety for older or less mobile people
Comparing quotes
- What happens if the damage is worse than the photos show
- When it can be used again
- What protection goes down before work starts
- Whether they match the colour on site
Questions from Bulmore
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
How do I get a price for non-slip bath coating in Bulmore?
The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Do you work in Bulmore?
Yes. We work across the UK and come to Bulmore. Send pictures and we will quote, or call 0345 017 0787.
Can you quote from pictures?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
If you manage property in Bulmore, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, typically overnight.
How to prepare
- Let us know if it has been repaired before
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Advice
Should you replace it?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. We charge the same wherever you are, so there’s no premium for Bulmore. What changes the price is the job itself: the material, the amount of damage and how many items.
Why Bulmore customers choose us
- Nothing taken out or refitted
- We leave the room as we found it
- Free fixed quotes from pictures
- One-year guarantee on every repair
Take a look at our prices page.
About our accreditations · Every repair comes with a one-year guarantee.
