Nottingham · England

Non-Slip Bath Coating in Bunny

Non-slip bath coating in Bunny without the cost of replacing. Get a fixed price from your pictures, then we come to you.

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Bunny

How we handle non-slip bath coating in Bunny

It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Common call-outs are for worn-out textured areas and a bath or tray that is slippery when wet, across resurfaced baths, shower trays and wet room floors (ask us).

All our work is covered by our one-year guarantee, wherever you are in Nottingham. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Area
Bunny (NG11)
County
Nottingham
Cover
A year, on every repair
Price
Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

When to call us in Bunny

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

The things customers typically mention when they call are:

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people

Before you book anyone

  • How long it needs to cure
  • What the guarantee covers, and for how long
  • How the colour is matched
  • Whether a trained technician does the job

Our hiring checklist

Landlords, agents and businesses in Bunny

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.

Should you replace it?

Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why choose Surface Doctor in Bunny

  • We leave the room as we found it
  • One-year guarantee on every repair
  • No need to remove anything
  • One price list for the whole UK

See our full price list.

Bunny: your questions answered

Do I have to be there?

We need someone to let us in. You don’t need to watch us work.

What happens after I send pictures?

We come back with a fixed price, usually with dates to choose from. There’s no obligation to book.

How do I book?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

It’s been repaired before. Can you still fix it?

Generally, yes. Let us know what was used before.

Will a non-slip coating change how my bath looks?

Only slightly: it shows as a matt area where you stand.

What areas do you cover?

We cover the entire UK, including Bunny and the rest of Nottingham. Send your postcode with your pictures and we will offer you dates.

Is there any odour?

There may be a mild smell during the work.

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.

Prices and what affects them

Every quote is fixed and free. What we look at:

  • What the surface is made of
  • How many areas need work
  • What kind of damage it is
  • The colour and finish to match

Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

How to get a fixed price

The better the photos, the more accurate the price. Here’s what helps:

  • What it’s made of, if you know
  • Natural light rather than flash
  • A coin or ruler next to the damage for scale
  • The postcode, so we can plan the visit

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed price the same day in most cases.

When we would advise against a repair

We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer.

Materials we work on in Bunny

  • Acrylic baths
  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays

The process

Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It typically takes a morning or an afternoon, and you’re welcome to carry on with your day while we work.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, normally overnight.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Plan for the room to be out of bounds to pets and children
  • Let us know which floor the room is on

Get a quote

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Send pictures for a quote

Read more

About Bunny

Bunny is about 3 miles south-east of Clifton, in Nottingham. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. We work in all 51 towns and villages across Nottingham. You can also see our page for Birmingham, about 42 miles away.

Here we cover the NG11 postcode area. That includes homes on Loughborough Road, Albert Road and Victoria Road and the roads around them. Nearby, we also work in Bradmore (1 mile north), Wysall (2 miles south-east), Ruddington (2 miles north), Costock (2 miles south) and Thorpe in the Glebe (3 miles south-east). We also work in nearby towns such as Nottingham (7 miles north), Arnold (9 miles north), Bulwell (10 miles north), Sneinton (6 miles north), St Ann's (7 miles north) and Clifton (3 miles north-west).

Landmarks near Bunny

Locally, our jobs take us to homes close to Bunny CofE Primary School, St Mary's Church and The Rancliffe Arms, among other places. A little further out are Ruddington Village Museum (2.1 miles north) and Basford Rural District (2.6 miles north). For a walk, there is Wilford Hill and Wilwell Farm Nature Reserve.

Map of Bunny © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.