South Lanarkshire · Scotland
Non-slip bath & shower coating in Burnside, South Lanarkshire
Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Burnside. Send pictures for a free, fixed quote.
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Resurfaced baths that are now too smooth
Our work in Burnside
Burnside is about 2 miles west of Cambuslang, in South Lanarkshire. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We work in all 139 towns and villages in South Lanarkshire.
Here we cover the G73 postcode area. Local streets include Snaefell Avenue, Burnside Road and Lower Bourtree Drive, all of which we cover. Burnside is on the A749, which makes it straightforward to reach. We also cover the places around Burnside: Springhall (1 mile south-east), Cathkin (1 mile south), Eastfield (1 mile north), Whitlawburn (1 mile south-east) and Kirkhill (1 mile east). Further out, we also cover East Kilbride (4 miles south), Hamilton (6 miles south-east), Uddingston (5 miles east), Blantyre (4 miles east), Larkhall (10 miles south-east) and Carluke (15 miles east).
Local landmarks in Burnside
Locally, our jobs take us to homes close to West Coats Primary School, Fernhill School and Stonelaw Parish Church, among other places. There is a railway station in Burnside itself: Burnside station. Nearby you will also find Scottish Football Museum (2.2 miles north-west) and Rutherglen Castle (1.2 miles north-west). Green spaces nearby include Cathkin Braes and Hogganfield Loch.
Non-slip bath coating in Burnside, done in place
It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Common call-outs are for worn-out textured areas and bath mats that harbour mould or get forgotten, in shower trays, resurfaced baths and acrylic baths.
Big or small, you get the same one-year guarantee. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Location
- Burnside (G73)
- County
- South Lanarkshire
- Cover
- One year on every repair
- Quote
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
It helps to know what we cannot do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think.
Materials we work on in Burnside
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
- Acrylic baths
Work for landlords and builders
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Towns and villages near Burnside
More services for Burnside
What affects the price in Burnside
We charge the same across the UK, including Burnside. The price reflects:
- The colour and finish to match
- How many areas need work
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- A wider photo showing the whole bath or shower tray
- Where you are, by postcode
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- No need to remove anything
- Straight answers about what a repair can do
- A fixed quote before booking
- Typically one visit, start to finish
See our prices page.
Questions from Burnside
Can you redo someone else’s repair?
Generally, yes. We remove the old repair before doing a new one.
Do you come to Burnside?
We do. Repair technicians travel to Burnside from across the region, and the price is the same as everywhere else.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
How much does non-slip bath coating cost in Burnside?
Because every job differs, we price from photos. You’ll get a fixed figure before booking.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
How the visit works
The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the work takes a few hours. At the end we talk you through the curing time and the aftercare.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, usually overnight.
Getting ready for the visit
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
- Let us know about parking or access
How to get a price
Most clients in Burnside get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Related advice
Common problems we fix in Burnside
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
You may need us if you’ve spotted any of these:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
What your quote should include
- Who will actually do the work
- What prep work is covered
- What the guarantee covers, and for how long
- Whether the colour is mixed to match
About our accreditations · Every repair comes with a one-year guarantee.
