Cumbria · England

Non-Slip Bath Coating for Chestnut Hill homes

Local non-slip bath coating for Chestnut Hill: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Chestnut Hill?

How we handle non-slip bath coating in Chestnut Hill

It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. Whether it’s a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, we can typically put it right.

Every repair is covered by a one-year guarantee. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Location
Chestnut Hill (CA12)
Area hub
Cumbria
Warranty
A year, on every repair
Quote
Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026

How the visit works

Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a morning or an afternoon, and the room is left clean and tidy.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Getting ready for the visit

  • Let us know about parking or access
  • Ensure the area is dry
  • Let us know if it has been repaired before

Getting a price

We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

Send pictures for a quote

Advice

Where we work around Chestnut Hill

Chestnut Hill is about 11 miles south-east of Cockermouth, in Cumbria. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Our repair technicians cover 438 places across Cumbria. Our jobs stretch from Chestnut Hill to Newcastle upon Tyne (65 miles away).

We cover every part of CA12 and the streets around it. You’ll find streets such as Forge Lane, Springs Road and Penrith Road, all of which we cover. With the A66 and A591 close by, Chestnut Hill is simple for us to get to. If you are just outside Chestnut Hill, we cover Briery (1 mile east), Keswick (1 mile west), Cumberland (1 mile north-west), Ormathwaite (1 mile north-west) and Applethwaite (2 miles north-west). We also work in nearby towns such as Penrith (15 miles east), Cockermouth (11 miles north-west), Fair Hill (15 miles east), Ambleside (13 miles south-east), Aspatria (14 miles north-west) and Dearham (15 miles north-west).

What’s near Chestnut Hill

We visit homes around Keswick School, The Keswick Country House Hotel and Church of St John and the streets around them. Other landmarks nearby include Crosthwaite's Museum (0.8 miles west). For a walk, there’s Tewet Tarn and Latrigg.

Map of Chestnut Hill © OpenStreetMap contributors

What affects the price in Chestnut Hill

There’s no charge for travel to Chestnut Hill. The price comes down to:

  • The size and number of damaged areas
  • The colour and finish to match
  • The material and finish
  • How many items we do on one visit

We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed quote

You can generally get a fixed price without us visiting. To help us price it:

  • A clear, close picture of the problem area
  • A wider photo showing the entire bath or shower tray
  • Your postcode, so we can check dates
  • The material, if you know it

There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

What a repair cannot fix

To be straight with you, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly.

Materials we repair

  • Resurfaced baths
  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays

Landlords, agents and businesses in Chestnut Hill

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

For developers and builders, we fix damage before handover. We can visit several plots in one trip.

Should you replace it?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

Why us?

  • We come to you, anywhere in the UK
  • A year’s guarantee on all work
  • No extra charge for your area
  • Fixed prices from your pictures

Take a look at our pricing.

Should I try a DIY kit first?

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

When to call us in Chestnut Hill

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

People typically call us after spotting one of these:

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

Before you book anyone

  • What aftercare is recommended
  • Who will actually do the work
  • Whether the price is fixed and includes VAT
  • The length of the guarantee and what it covers

Our hiring checklist

Common questions in Chestnut Hill

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

How do I book?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Can you redo someone else’s repair?

Typically, yes. We remove the old repair before doing a new one, so let us know about it.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.

Is the work guaranteed?

Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.

Can you quote from photos?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.