Cumbria · England

Non-slip bath & shower coating in Dearham, Cumbria

Clear non-slip coatings for baths and shower trays for homes and businesses in Dearham and across Cumbria. Free, fixed quotes from your photos.

  • Safety for older or less mobile people
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Dearham homes

How we handle non-slip bath coating in Dearham

It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Common call-outs are for a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, across acrylic baths, shower trays and wet room floors (ask us).

All of our repairs are guaranteed for twelve months. We return to put right any problem with the work. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Area
Dearham (CA15)
Region
Cumbria
Guarantee
12 months on all our work
Quote
Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026

How we price non-slip bath coating

Every quote is fixed and free. What we look at:

  • The material
  • The type of damage
  • Unusual colours or finishes
  • Whether we combine several jobs

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Quotes from your photos

Good photos mean an accurate price. Here’s what we find most useful:

  • A coin beside the damage so we can judge size
  • What it’s made of, if you know
  • A close-up of the damage, in focus
  • The postcode, so we can plan the visit

There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.

About Dearham

Dearham is about 7 miles north-east of Workington, in Cumbria. We travel to homes and businesses in Dearham, so there’s no workshop to go to. We work in 438 places in Cumbria, from the larger towns to small villages. Our nearest city page is Newcastle upon Tyne, about 75 miles away.

Every address in CA15 is covered. From Main Street, Browside Road and Central Road or a nearby road, a technician can come to you. Close by, we cover Crosby (2 miles north), Broughton Moor (2 miles south-west), Ewanrigg (2 miles west), Maryport (2 miles west) and Crosscanonby (2 miles north). Larger places within reach include Workington (7 miles south-west), Whitehaven (13 miles south-west), Cockermouth (5 miles south-east), Keswick (15 miles south-east), Moorclose (7 miles south-west) and Wigton (14 miles north-east).

What’s near Dearham

Our customers here include homes close to St Mungo's Church and Netherhall School. The closest station to Dearham is Maryport station, roughly 1.9 miles west. Other landmarks nearby include Ellenborough and Ewanrigg (1.5 miles west) and Hayton Castle (4.5 miles north-east).

Map of Dearham © OpenStreetMap contributors

Common questions in Dearham

Can you price it without visiting?

In nearly every case. If photos do not show enough, we will ask for another angle.

Is there a guarantee?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Does someone need to be in?

Yes. We need access to the room while we work, at a time that suits you.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

How do I book?

A close-up, a wider photo and your postcode. Then we will agree a date.

What does non-slip bath coating cost?

Because every job differs, we price from pictures. You will get a fixed figure before booking.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

What areas do you cover?

Everywhere in the UK, Dearham included. There’s no extra charge for travel.

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

For landlords and businesses

We work for landlords, letting agents and housing providers in Dearham as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Do you need non-slip bath coating in Dearham?

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Get in touch if you’ve noticed any of these:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

What to look for in a quote

  • Whether the colour is mixed to match
  • Whether there are any call-out or travel charges
  • A fixed quote, and whether VAT is included
  • How the room is protected while they work

Choosing a repair company

What a repair can’t fix

We’d rather lose a job than do one that will not last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer before booking.

Materials we repair

  • Acrylic baths
  • Enamelled baths
  • Resurfaced baths
  • Shower trays
  • Wet room floors (ask us)

How the visit works

Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. It generally takes a morning or an afternoon, and you can get on with other things while we’re there.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Clear the area around the damage
  • Tell us about parking, stairs or access
  • Keep a parking space free if you can

How to get a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

Get a fixed quote

Advice

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.

Why us?

  • No extra charge for your area
  • Rooms protected and left tidy
  • Nothing taken out or refitted
  • A year’s guarantee on all work

See our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.