Shropshire · England

Non-slip bath & shower coating in Clive, Shropshire

Non-slip bath coating across Clive and nearby, done in a single visit in most cases and guaranteed for a year.

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Clive

What happens on the day

We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. You can expect it to take a morning or an afternoon, and we will tell you if anything changes.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, normally overnight.

How to prepare

  • Clear the area around the damage
  • Tell us about any previous repairs or coatings
  • Point us to the nearest place to park

Get a quote

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.

Send pictures for a quote

Advice

Non-slip bath coating in Clive without replacing anything

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. If you’re dealing with a bath or tray that is slippery when wet and worn-out textured areas, we can normally put it right, on acrylic baths, enamelled baths and wet room floors (ask us) alike.

A one-year guarantee comes with the work, just as it does everywhere we cover. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Location
Clive (SY4)
County
Shropshire
Warranty
12 months on all our work
Quote
Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Our work in Clive

Clive is about 7 miles north of Shrewsbury, in Shropshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Clive is one of 433 places in Shropshire where we work. Our jobs stretch from Clive to Birmingham (about 42 miles away).

Here we cover the SY4 postcode area. From High Street, Station Road and Jubilee Street or a nearby road, a technician can come to you. We also cover the places around Clive: Yorton (1 mile south-west), Grinshill (1 mile south-east), Alderton (1 mile south-west), Barkers Green (3 miles north) and Myddle (3 miles west). We also work in nearby towns such as Shrewsbury (7 miles south), Oswestry (14 miles west), Market Drayton (12 miles north-east), Coleham (8 miles south), Kingsland (7 miles south) and Whitchurch (11 miles north).

Around Clive

Our customers here include homes close to Clive CofE Primary School and Church of All Saints, among other places. For rail, the closest station is Yorton station, roughly 0.6 miles south-west. Well-known places in the area include Morgan Library (3 miles north) and North Shropshire (3 miles north).

Map of Clive © OpenStreetMap contributors

Clive: your questions answered

When can you do it?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

How do I book?

Send photos through the quote form or call 0345 017 0787, and we will do the rest.

What areas do you cover?

We work UK-wide. Our prices are the same everywhere.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Can pets and children be at home?

Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.

Can landlords book you?

Yes, often. We can quote for several properties together and work between tenancies.

What happens once I’ve sent photos?

We come back with a fixed price, usually with dates to choose from. There’s no obligation to book.

Can tenants book a repair?

We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

When to call us in Clive

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

The most common problems we are called about are:

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

What your quote should include

  • Who turns up on the day
  • What prep work is covered
  • The length of the guarantee and what it covers
  • How the colour is matched

10 questions to ask before booking

Work for landlords and builders

Housing associations and facilities teams use us for planned and reactive repairs in Shropshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Can I fix it myself?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

What non-slip bath coating costs

Quotes are free and the price is fixed. What we take into account:

  • How many areas need work
  • Access to the area
  • What kind of damage it is
  • The colour and finish to match

The price reflects the work involved, not your postcode. You will see the full price before you book, with no extras added later.

Getting a price from pictures

A couple of clear pictures is all it takes. Try to include:

  • Something in shot to show the size
  • One picture of the entire bath or shower tray
  • Any earlier repairs or coatings
  • Your postcode, so we can check dates

We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.

Honest limits

Some jobs are not right for a repair, for example:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer before you book.

Materials we repair

  • Resurfaced baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Shower trays
  • Enamelled baths

Repair or replace in Clive?

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. We charge the same wherever you are, with no extra for Clive. What changes the price is the job itself: how much damage, what it’s made of and how many items.

What you get with us

  • Honest advice, even when it means no job
  • Rooms protected and left tidy
  • Same prices wherever you are
  • Nothing taken out or refitted

Read our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.