Herefordshire · England

Non-Slip Bath Coating in Clodock

Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Clodock. Send pictures for a free, fixed quote.

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Clodock

Work for landlords and builders

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Non-slip bath coating in Clodock without replacing anything

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. We work on resurfaced baths, enamelled baths and wet room floors (ask us), and the jobs we see most are safety for older or less mobile people and worn-out textured areas.

The work is covered for a year after we finish. If anything is not right, ring us and we will sort it. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Location
Clodock (HR2)
County
Herefordshire
Guarantee
12 months on all our work
Quote
Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Where we work around Clodock

Clodock is about 8 miles north of Abergavenny, in Herefordshire. Anywhere in HR2, we carry out the work at your property. Clodock is one of 255 towns and villages in Herefordshire we cover. Our jobs stretch from Clodock to Birmingham (59 miles away).

We cover every part of the HR2 postcode area and the streets around it. Nearby, we also work in Longtown (1 mile north), Walterstone Common (2 miles south-east), Lower Maes-coed (2 miles north-east), Rowlestone (4 miles east) and Abbey Dore (4 miles north-east). Further out, we also cover Hereford (14 miles north-east), Redhill (13 miles north-east), Newton Farm (13 miles north-east), Whitecross (13 miles north-east), Eign Hill (14 miles north-east) and Widemarsh (14 miles north-east).

What’s near Clodock

Typical jobs here are in homes near Cornewall Arms, Longtown Community Primary School and Church of St Clodock and the streets around them. Other landmarks nearby include Longtown Castle (1.1 miles north). Green spaces nearby include The Parks and Hatterrall Hill.

Map of Clodock © OpenStreetMap contributors

How it works

We begin by going over the job with you. After that, protection goes down around the work area and we start. You can expect it to take a few hours.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, usually overnight.

Preparing for the visit

  • Mention any parking restrictions or tricky access
  • Have somewhere for us to park nearby if possible
  • Ensure the room can be ventilated

Ask for a price

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can price the job the same day in most cases.

Get a fixed price

Related advice

When a repair isn’t the answer

Before you book, it’s worth knowing the limits too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think.

Materials we work on in Clodock

  • Wet room floors (ask us)
  • Acrylic baths
  • Shower trays
  • Resurfaced baths
  • Enamelled baths

Should I try a DIY kit first?

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.

Clodock questions

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Is it worth repairing rather than replacing?

Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Will I see the coating?

Very little: the treated area looks slightly matt.

Is there a guarantee?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Can you repair something that is been repaired before?

Yes, we frequently do. It can add a little time, which we include in the quote.

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Prices and what affects them

You will not pay by the hour. The price is based on:

  • Whether old repairs or coatings need taking off
  • Where the damage is and how we get to it
  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.

Getting a price from pictures

We price nearly every job from photos. This is what to send:

  • What it’s made of, if you know
  • Daylight if possible, and no flash reflection
  • Your postcode, so we can check dates
  • Whether it’s been repaired or coated before

You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Common problems we fix in Clodock

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

These are the problems we’re asked about most:

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet

Comparing quotes

  • A fixed price, and whether VAT is included
  • What happens if they find more damage
  • Who will actually do the work
  • What prep work is covered

Our hiring checklist

Should you replace it?

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why us?

  • A fixed quote before booking
  • Most jobs done in one visit
  • No need to remove anything
  • We will tell you if it’s not worth repairing

See our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.