Staffordshire · England

Non-slip bath & shower coating in Colton, Staffordshire

We travel to Colton for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Colton

Non-slip bath coating in Colton without replacing anything

It’s popular with older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. Common call-outs are for worn-out textured areas and a bath or tray that is slippery when wet, across enamelled baths, shower trays and resurfaced baths.

Every repair is covered by a one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Stained shower tray resurfaced to clean white, before and after
Where
Colton (WS15)
County
Staffordshire
Cover
A year, on every repair
Price
Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026

Work for landlords and builders

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.

Colton: your questions answered

What does non-slip bath coating cost?

The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

Will there be a smell?

There can be some smell while we work, which is why we ventilate. It clears as the materials cure.

Can you repair something that’s been repaired before?

In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

What information do you need?

Some pictures, your postcode and how to reach you. On the day, access to the room.

Should you replace it?

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.

Why book with us

  • Dust sheets down, tidy finish
  • CHAS and Constructionline accredited
  • Honest advice, even when it means no job
  • A fixed quote before you book

Read our prices page.

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

What non-slip bath coating costs

A fixed quote means you know the cost before booking. We look at:

  • The material
  • The colour and finish to match
  • Doing more than one item at once
  • How easy the damage is to reach

We charge the same wherever you are, with no extra for Colton. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Quotes from your photos

You can typically get a fixed price without us visiting. To make it quick:

  • A coin or ruler next to the damage for scale
  • Any earlier repairs or coatings
  • One picture of the whole bath or shower tray
  • Daylight if possible, and no flash reflection

The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.

When to call us in Colton

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

People usually call us when they notice something like this:

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

What to look for in a quote

  • Is the price fixed, and does it include VAT?
  • How changes to the job are handled
  • Aftercare advice
  • The length of the guarantee and what it covers

10 questions to ask before booking

What we do, step by step

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a few hours. At the end we talk you through how soon it can be used and how to look after it.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, normally overnight.

How to prepare

  • Have somewhere for us to park nearby if possible
  • Keep pets and children out of the room while we work
  • Clear the area around the damage

Get a quote

Most customers in Colton get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Send photos for a quote

Read more

What a repair cannot fix

We will not take on work that won’t last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer before you book.

Surfaces we repair

  • Wet room floors (ask us)
  • Shower trays
  • Resurfaced baths
  • Acrylic baths
  • Enamelled baths

Colton and the surrounding area

Colton is about 2 miles north of Rugeley, in Staffordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Colton is one of 512 places in Staffordshire we cover. You can also see our page for Birmingham, about 22 miles away.

Our visits in WS15 are booked in the same way as anywhere else. From High Street, Aspley Place and Martlin Lane or anywhere nearby, we can come to you. We also cover the places around Colton: Stockwell Heath (1 mile north), Bishton (2 miles west), Rugeley (2 miles south), Etchinghill (2 miles south-west) and Slitting Mill (2 miles south-west). Further out, we also cover Stafford (8 miles west), Burton upon Trent (12 miles east), Tamworth (15 miles south-east), Cannock (7 miles south-west), Lichfield (8 miles south-east) and Burntwood (7 miles south).

Around Colton

In Colton, that means homes near The Hart School, Church of St Mary and The St. Mary's CofE Primary School and the streets around them. The nearest railway station is Rugeley Trent Valley station, roughly 1 mile south. A little further out are Cannock Castle Ring (4.8 miles south) and Museum of Childhood And Costume (2.2 miles north). Green spaces nearby include Tixall Wide and Wolseley Centre.

Map of Colton © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.