Somerset · England

Non-Slip Bath Coating in Cutcombe

Fixed-price non-slip bath coating in Cutcombe and the surrounding area, done in a single visit in most cases.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Cutcombe

How we price non-slip bath coating

A fixed quote means you know the cost before you book. We look at:

  • Whether old repairs or coatings need taking off
  • How easy the damage is to reach
  • The size and number of damaged areas
  • The material and finish

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

How to get a fixed quote

Most quotes are done from pictures alone. To make it quick:

  • One picture of the whole bath or shower tray
  • A coin beside the damage so we can judge size
  • Daylight if possible, and no flash reflection
  • Your postcode, so we can check dates

To get a price, send two or three photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.

How we handle non-slip bath coating in Cutcombe

The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. We regularly repair enamelled baths, resurfaced baths and acrylic baths, and the jobs we see most are resurfaced baths that are now too smooth and safety for older or less mobile people.

You get a one-year guarantee, the same in Cutcombe as everywhere else we work. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Area
Cutcombe (TA24)
Area hub
Somerset
Guarantee
One year on every repair
Quote
Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Cutcombe and nearby

Cutcombe is about 5 miles south-west of Minehead, in Somerset. We visit homes and businesses in Cutcombe and nearby villages, so nothing has to leave your home. We work in all 640 towns and villages across Somerset.

Our repair technicians cover all of TA24. Local streets include Lower Park Lane, Higher Park Lane and Ashwell Lane, all of which we cover. If you’re just outside Cutcombe, we cover Wheddon Cross (1 mile south-west), Timberscombe (3 miles north-east), Churchtown (3 miles east), Winsford (3 miles south-west) and Exton (3 miles south). We also work in nearby towns such as Minehead (5 miles north-east), Watchet (9 miles east), Wiveliscombe (12 miles south-east), Williton (9 miles east), Dulverton (7 miles south) and Porlock (5 miles north-west).

What’s near Cutcombe

Our clients here include homes close to Cutcombe Church of England First School, The Rest and be Thankful Inn and Church of St John. Other landmarks nearby include Dunster Castle (4.7 miles north-east). Open spaces near Cutcombe include Staddon Hill.

Map of Cutcombe © OpenStreetMap contributors

Repairing versus replacing in Cutcombe

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.

What you get with us

  • Dust sheets down, tidy finish
  • One visit for most repairs
  • Every repair guaranteed for a year
  • CHAS, Constructionline and SafeContractor accredited

See our full price list.

Landlords, agents and businesses in Cutcombe

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

What we do, step by step

We agree an arrival time beforehand. On site, it takes a few hours for most jobs. We leave the room clean and you’ll know when it can be used.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, normally overnight.

Before we arrive

  • Let us know if it has been repaired before
  • Open a window if you can
  • Clear the area around the damage

Getting a price

For a price in Cutcombe, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Send pictures for a quote

Advice

When we’d advise against a repair

In fairness, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer.

Materials we work on in Cutcombe

  • Shower trays
  • Wet room floors (ask us)
  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

What we are called out for in Cutcombe

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

It’s worth getting a quote if you see:

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet

Before you book anyone

  • What happens if they find more damage
  • Is the price fixed, and does it include VAT?
  • Who will actually do the work
  • How soon you can use it again

Our hiring checklist

FAQs for Cutcombe

Will a non-slip coating change how my bath looks?

Very little: the treated area looks slightly matt.

Are there extra charges for Cutcombe?

There’s no separate call-out charge. The fixed quote covers the visit and the work.

Will the price change on the day?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

What areas do you cover?

Across the UK, and that includes Cutcombe. Prices don’t change with location.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

Do you work in Cutcombe?

Yes. We work across the UK and come to Cutcombe. Send us pictures for a fixed quote, or call 0345 017 0787.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.