Cumbria · England
Non-slip bath & shower coating in Maryport, Cumbria
Non-slip bath coating in and around Maryport: photo quotes, tidy work and a year’s guarantee.
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- A bath or tray that is slippery when wet
About our non-slip bath coating in Maryport
It’s a clear, textured coating, so the bath looks much the same. It’s popular with older people, families and holiday lets. We regularly repair wet room floors (ask us), resurfaced baths and shower trays, and common reasons people get in touch are a bath or tray that is slippery when wet and safety for older or less mobile people.
Big or small, it’s backed by a one-year guarantee in Maryport and across Cumbria. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Maryport (CA15)
- County
- Cumbria
- Guarantee
- A year, on every repair
- Quotes
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Maryport
- Shower trays
- Acrylic baths
- Enamelled baths
- Resurfaced baths
- Wet room floors (ask us)
What non-slip bath coating costs
You will not pay by the hour. The price depends on:
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- The material and finish
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- The material, if you know it
- Any earlier repairs or coatings
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you are under no obligation.
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why choose Surface Doctor in Maryport
- One visit for most repairs
- One-year guarantee on every repair
- Dust sheets down, tidy finish
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page.
Work for landlords and builders
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Also near Maryport
Also in Maryport
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
About Maryport
Maryport is about 6 miles north-east of Workington, in Cumbria. Jobs in Maryport are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Maryport is one of 438 towns and villages in Cumbria where we work. You can also see our page for Newcastle upon Tyne, about 76 miles away.
Postcode districts we cover here: CA15. We regularly work on streets such as High Street, Fleming Square and Main Street and the roads around them. Being close to the A594 and A596, Maryport is simple for us to get to. If you’re just outside Maryport, we cover Ewanrigg (1 mile south), Fothergill (1 mile south-west), Flimby (2 miles south-west), Dearham (2 miles east) and Broughton Moor (2 miles south-east). Further out, we also cover Workington (6 miles south-west), Whitehaven (12 miles south), Cockermouth (6 miles south-east), Moorclose (6 miles south), Wigton (15 miles north-east) and Cleator Moor (13 miles south). Maryport is one of the larger places we cover in Cumbria.
Near you in Maryport
Our clients here include homes close to Parish Church of St Mary, Netherton Infant School and Netherhall School, among other places. Maryport has its own railway station: Maryport station. Nearby you’ll also find Senhouse Roman Museum (0.6 miles north) and Maryport Urban District (under half a mile south). Green spaces nearby include Siddick Pond.
Your questions about non-slip bath coating in Maryport
Will I see the coating?
Very little: the treated area looks slightly matt.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed price includes everything.
Do you cover the whole of Cumbria?
The entire UK, including all of Cumbria. Send your postcode with your pictures and we will offer you dates.
Do you work in Maryport?
Yes, we do. We send a technician to Maryport for every job, with no extra charge for travel.
What information do you need?
Photos of the damage, a photo of the whole bath or shower tray and your postcode. Then we will agree a date.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Common problems we fix in Maryport
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Typical reasons for a call-out include:
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Safety for older or less mobile people
Before you book anyone
- Whether they match the colour on site
- How soon you can use it again
- What happens if the damage is worse than the pictures show
- Who will actually do the work
How it works
We turn up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take a morning or an afternoon, and we leave the room as we found it.
- We clean and degrease the standing area.
- Next we mask off the area.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, normally overnight.
How to prepare
- Tell us about parking, stairs or access
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
Ask for a price
To get a price, send two or three pictures using our quote form or call us. We’ll say immediately if a repair is the right fix.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
