Moray · Scotland

Non-slip bath & shower coating in Dyke, Moray

Non-slip bath coating in and around Dyke: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Dyke homes

Non-slip bath coating in Dyke, done in place

It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. If you are dealing with worn-out textured areas and bath mats that harbour mould or get forgotten, we can generally put it right, on resurfaced baths, acrylic baths and wet room floors (ask us) alike.

The work is covered for a year after we finish. If anything is not right, ring us and we will come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Location
Dyke (IV36)
Region
Moray
Warranty
One year on every repair
Quotes
Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026

How it works

We work cleanly and quietly. Protection goes down first, then the job itself takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, normally overnight.

Before we arrive

  • Make sure the area is dry
  • Point us to the nearest place to park
  • Clear the area around the damage

Ask for a price

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.

Send pictures for a quote

Read more

Dyke questions

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

What does non-slip bath coating cost?

We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your IV36 postcode.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Just make sure the landlord agrees.

What do you need from me?

Just pictures, your postcode and a contact number. On the day, access to the room.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Can I add another job to the visit?

Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.

When to call us in Dyke

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Customers normally contact us about:

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas

Before you book anyone

  • How the colour is matched
  • How changes to the job are handled
  • Whether cleaning and preparation are in the price
  • What aftercare is recommended

10 questions to ask before booking

Landlords, agents and businesses in Dyke

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

What non-slip bath coating costs

Every quote is fixed and free. What we look at:

  • Where the damage is and how we get to it
  • What kind of damage it is
  • Previous DIY repairs that have to come out
  • How much damage there is

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Quotes from your pictures

Photographing the damage takes a minute. Please include:

  • Whether it’s been repaired or coated before
  • A coin or ruler next to the damage for scale
  • A clear, close picture of the problem area
  • What it’s made of, if you know

A quote takes minutes to ask for: photograph the damage, then the entire bath or shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.

Should you replace it?

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.

Why us?

  • No extra charge for your area
  • We come to you, anywhere in the UK
  • Dust sheets down, tidy finish
  • Everything repaired in place

Take a look at our prices page.

Dyke and the surrounding area

Dyke is about 3 miles west of Forres, in Moray. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover 58 places across Moray.

Here we cover the IV36 postcode area. Local streets include Davidson Place, Darklass Road and Fir Park, and we cover them all. If you are just outside Dyke, we cover Red Craig (2 miles east), Mundole (2 miles south-east), Forres (3 miles east), Auldearn (5 miles south-west) and Rafford (5 miles east). Larger places within reach include Elgin (14 miles east), Ashgrove (15 miles east), Burghead (10 miles north-east), Hopeman (12 miles north-east) and Kinloss (6 miles east). If you’re somewhere remote, call first so we can plan the visit.

Local landmarks in Dyke

Typical jobs here are in homes near Dyke Parish Church, among other places. The closest station to Dyke is Forres station, roughly 2.6 miles east of the centre. Further afield, we also cover the area around Leanchoil Hospital (3.9 miles east) and Brodie Castle (0.7 miles south-west). For a walk, there’s Loch of Blairs and Culbin Sandhills.

Map of Dyke © OpenStreetMap contributors

What a repair can’t fix

We’ll always be straight with you, so here’s what a repair can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer before you book.

Surfaces we repair

  • Shower trays
  • Resurfaced baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Enamelled baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.