Moray · Scotland
Bath re-enamelling & resurfacing in Dyke, Moray
Our technicians come to Dyke for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- A bath that stays dull however much you clean it
When to call us in Dyke
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
The most common problems we are called about are:
- A roll-top that is seen better days
- An outdated colour you’d like to change
- Stains that will not shift
- A bath that stays dull however much you clean it
What your quote should include
- How the colour is matched
- What aftercare is recommended
- What preparation is included
- How changes to the job are handled
Bath re-enamelling in Dyke without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Common call-outs are for thin, worn enamel in places and a bath in a colour that no longer suits, on basins & shower trays, cast iron baths and acrylic baths.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Dyke (IV36)
- County
- Moray
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
More services for Dyke
Dyke and nearby
Dyke is about 3 miles west of Forres, in Moray. We visit customers in Dyke and nearby villages, so you do not need to take anything anywhere. Dyke is one of 58 towns and villages in Moray where we work.
Postcode districts we cover here: IV36. You will find streets such as Davidson Place, Darklass Road and Fir Park, and we cover them all. Close by, we cover Red Craig (2 miles east), Mundole (2 miles south-east), Forres (3 miles east), Auldearn (5 miles south-west) and Rafford (5 miles east). Further out, we also cover Elgin (14 miles east), Ashgrove (15 miles east), Burghead (10 miles north-east), Hopeman (12 miles north-east) and Kinloss (6 miles east). If you are somewhere remote, ring us first and we’ll plan the trip.
Around Dyke
Around Dyke, we work in homes near Dyke Parish Church, among other places. The closest station to Dyke is Forres station, about 2.6 miles east of the centre. Nearby you will also find Leanchoil Hospital (3.9 miles east) and Brodie Castle (0.7 miles south-west). The countryside around Dyke includes Loch of Blairs and Culbin Sandhills.
Repairing versus replacing in Dyke
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the whole surface without moving it. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why Dyke clients choose us
- Repair technicians who travel to you, UK-wide
- Fixed prices from your pictures
- Accredited with CHAS, Constructionline and SafeContractor
- Every repair guaranteed for a year
Read our pricing and bath cost comparison.
Keeping it looking good
It’s all simple stuff:
- Respect the curing time we give you
- Get any chip repaired quickly
- A quick wipe after use keeps limescale away
- Don’t leave bottles, razors or sponges standing on the surface
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
When we’d advise against a repair
It helps to know what we cannot do too:
- Problems we cannot see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
Questions from Dyke
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What areas do you cover?
Across the UK, and that includes Dyke. Our prices are the same everywhere.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Dyke.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
What we do, step by step
There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to the best part of a day.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Make sure the room can be ventilated
- Make sure the area is dry
- Tell us about any previous repairs or coatings
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Landlord and trade work in Dyke
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
If you manage property in Dyke, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Dyke. The price reflects:
- How much damage there is
- Unusual colours or finishes
- How many items we do on one visit
- The material and finish
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- The material, if you know it
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
About our accreditations · Every repair comes with a one-year guarantee.
