Gloucestershire · England
Non-Slip Bath Coating for Falfield homes
Non-slip bath coating for Falfield, without a refit. Get a fixed price from your photos, then book a visit.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Worn-out textured areas
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Landlords, letting agents and housing providers in Falfield use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Non-slip bath coating in Falfield without replacing anything
It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Whether it’s resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, we can generally put it right, on acrylic baths, enamelled baths and resurfaced baths alike.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Falfield (GL12)
- County
- Gloucestershire
- Warranty
- 12 months on all our work
- Price
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Falfield
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Common reasons people in Falfield contact us include:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
Questions to ask before you book
- Whether the colour is mixed to match
- How changes to the job are handled
- Who will actually do the work
- What protection goes down before work starts
FAQs for Falfield
Will I see the coating?
Very little: the treated area looks slightly matt.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you charge for travel?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair something that is been repaired before?
Normally, yes. We remove the old repair before doing a new one.
Will there be a smell?
There can be some smell while we work. It clears as the materials cure.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
What affects the price in Falfield
We give every job a fixed price from pictures. These are the things that affect it:
- How many areas need work
- The colour and finish to match
- How many items we do on one visit
- What kind of damage it is
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A coin beside the damage so we can judge size
- Any details about the material
- Where you are, by postcode
- Daylight if possible, and no flash reflection
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you’re under no obligation.
How the visit works
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, and the room is left clean and tidy.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- We leave it to cure, usually overnight.
How to prepare
- Let us know if it has been repaired before
- Let us know about parking or access
- Open a window if you can
Get a quote
To get a price, send two or three photos through our quote form or call us. We will tell you honestly whether it can be repaired.
Read more
What we can’t put right
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer.
What we work on
- Shower trays
- Acrylic baths
- Enamelled baths
- Resurfaced baths
- Wet room floors (ask us)
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Falfield clients choose us
- One visit for most repairs
- Free fixed quotes from pictures
- Same prices wherever you are
- We will tell you if it’s not worth repairing
See our pricing.
Towns and villages near Falfield
What else we do in Falfield
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Falfield and nearby
Falfield is about 3 miles north-east of Thornbury, in Gloucestershire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover 470 places in Gloucestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 62 miles away.
All of GL12 is within our area. Streets in the area include Selman Drive, Anstey Gardens and Glebe Meadows. Neighbouring places we cover include Moorslade (1 mile north-west), Sundayshill (1 mile west), Lower Stone (1 mile north-west), Stone (1 mile north) and Woodford (2 miles north-east). Larger places within reach include Stroud (12 miles north-east), Quedgeley (15 miles north-east), Lydney (7 miles north-west), Kingsway Village (15 miles north-east), Cam (6 miles north-east) and Stonehouse (11 miles north-east).
What’s near Falfield
Our customers here include homes close to Church of St George, among other places. Other landmarks nearby include Thornbury Castle (3.4 miles south-west) and Thornbury and District Museum (3.6 miles south-west). For a walk, there’s Nind Nature Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
