Gloucestershire · England

Non-slip bath & shower coating in Moorslade, Gloucestershire

Our repair technicians come to Moorslade for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Moorslade

About our non-slip bath coating in Moorslade

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Common call-outs are for a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, on wet room floors (ask us), resurfaced baths and enamelled baths.

All our work is covered by our one-year guarantee. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Area
Moorslade (GL13)
Area hub
Gloucestershire
Guarantee
12 months on all our work
Quotes
Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026

Repair or replace in Moorslade?

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.

What you get with us

  • A year’s guarantee on all work
  • Fixed prices from your photos
  • One visit for most repairs
  • No extra charge for your area

Read our pricing.

Moorslade questions

When can you do it?

We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

How do I get a price for non-slip bath coating in Moorslade?

Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo with your GL13 postcode.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

Can I add another job to the visit?

Of course, and it usually saves money. Send pictures of everything together and you will get one combined price.

What happens if you find more damage?

Your quote covers the damage in the photos. If there is more, we will tell you before starting.

What do you need from me?

Use the quote form or ring 0345 017 0787, and we will do the rest.

DIY kit or professional repair?

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Signs you need non-slip bath coating in Moorslade

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Typical reasons for a call-out include:

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people

What your quote should include

  • What prep work is covered
  • What happens if the damage is worse than the pictures show
  • How the room is protected while they work
  • If travel is included in the price

10 questions to ask before you book

Landlords, agents and businesses in Moorslade

We carry out planned and one-off repairs for housing associations and facilities teams in Gloucestershire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

For anyone letting property in or around Moorslade, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.

How we price non-slip bath coating

We charge the same across the UK, including Moorslade. The price reflects:

  • Access to the area
  • The colour and finish to match
  • The material
  • Whether we combine several jobs

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

How to get a fixed price

Two or three clear pictures are usually enough. It helps if you send:

  • Whether it’s been repaired or coated before
  • One picture of the entire bath or shower tray
  • A coin beside the damage so we can judge size
  • Good light, ideally daylight, without flash glare

To get a price, send a couple of photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.

Moorslade and nearby

Moorslade is about 3 miles north-east of Thornbury, in Gloucestershire. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. Moorslade is one of 470 places in Gloucestershire we cover. You can also see our page for Birmingham, about 62 miles away.

Our visits in GL13 are booked in the same way as anywhere else. Nearby, we also work in Lower Stone (1 mile north-west), Falfield (1 mile south-east), Sundayshill (1 mile south-west), Stone (1 mile north-east) and Woodford (2 miles north-east). Further out, we also cover Stroud (12 miles north-east), Quedgeley (15 miles north-east), Lydney (6 miles north-west), Kingsway Village (15 miles north-east), Cam (6 miles north-east) and Stonehouse (11 miles north-east).

Landmarks near Moorslade

We visit homes around Stone with Woodford Church of England Primary School and Church of St George and the streets around them. Nearby you’ll also find Vale Community Hospital (5.7 miles north-east) and Thornbury and District Museum (3.7 miles south-west).

Map of Moorslade © OpenStreetMap contributors

What a repair can’t fix

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer before booking.

Materials we work on in Moorslade

  • Enamelled baths
  • Shower trays
  • Resurfaced baths
  • Acrylic baths
  • Wet room floors (ask us)

What happens on the day

Here’s how a visit usually runs: we arrive on time, protect everything around the work area, do the job and clear up. Plan for a few hours. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, typically overnight.

Before we arrive

  • Keep pets and children out of the room while we work
  • Have a window or extractor fan available
  • Avoid using the area for a few hours before we arrive

Getting a price

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and you’re under no obligation.

Send photos for a quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.