South Lanarkshire · Scotland

Non-Slip Bath Coating in Forth

Non-slip bath coating in and around Forth: photo quotes, tidy work and a year’s guarantee.

  • Safety for older or less mobile people
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Forth

Non-slip bath coating at your home in Forth

The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Whether it’s resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, we can help, on shower trays, acrylic baths and enamelled baths alike.

Every repair is covered by our one-year guarantee. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Area
Forth (ML11)
Region
South Lanarkshire
Warranty
12 months on all our work
Quote
Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What affects the price in Forth

Each job gets its own fixed quote. This is what makes a difference:

  • Where the damage is and how we get to it
  • The material
  • Whether it’s a chip, crack, burn or wear
  • How hard the colour is to match

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Quotes from your pictures

Before you send photos, a few simple things make all the difference:

  • Daylight if possible, and no flash reflection
  • One sharp close-up of the damage
  • Your postcode, so we can check dates
  • A coin or ruler next to the damage for scale

For a price in Forth, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

How it works

Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours. If anything looks different from your photos, we will talk to you before going ahead.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, generally overnight.

Getting ready for the visit

  • Keep children and pets away from the room on the day
  • Open a window if you can
  • Tell us about any previous repairs or coatings

Get a quote

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

Get a free quote

Advice

Our work in Forth

Forth is about 6 miles north-east of Carluke, in South Lanarkshire. Across the ML11 area, we come to you. Forth is one of 139 towns and villages in South Lanarkshire we cover. Our nearest city page is Edinburgh, about 22 miles away.

Jobs in ML11 are booked in the same way as anywhere else. Jobs here include addresses on Main Street, Forkens and Hailstonegreen and the roads around them. We also cover the places around Forth: Greenwall (1 mile north-west), Wilsontown (1 mile north-east), Climpy (1 mile north-west), Haywood (2 miles north-east) and Braehead (2 miles south-east). Within a short drive, we also cover Hamilton (14 miles west), Larkhall (11 miles west), Carluke (6 miles south-west), Lanark (7 miles south-west), Bothwell (15 miles west) and Viewpark (15 miles west).

Near you in Forth

In Forth, that means homes near Forth. The nearest railway station is Fauldhouse station, roughly 4 miles north. Other landmarks nearby include Couthally Castle (4 miles south-east).

Map of Forth © OpenStreetMap contributors

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.

What you get with us

  • Fixed prices from your photos
  • Rooms protected and left tidy
  • CHAS, Constructionline and SafeContractor accredited
  • No extra charge for your area

Take a look at our full price list.

For landlords and businesses

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

FAQs for Forth

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Is there any odour?

Expect a mild smell while we’re working, which fades afterwards.

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.

Do you cover the entire of South Lanarkshire?

We work UK-wide, and that includes Forth. Prices don’t change with location.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.

How quickly can you book me in?

It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.

What happens once I’ve sent photos?

We look at the photos and reply with a fixed quote and some dates. If we need another angle, we’ll ask.

What we cannot put right

We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer.

Materials we repair

  • Wet room floors (ask us)
  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths
  • Shower trays

Signs you need non-slip bath coating in Forth

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

These are the problems we are asked about most:

  • Safety for older or less mobile people
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

What your quote should include

  • How the room is protected while they work
  • Whether there are any call-out or travel charges
  • Whether a trained technician does the job
  • What the guarantee covers, and for how long

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.